--- In
AN1x-list@yahoogroups.com, "tickles88keys" <tickles88keys@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@> wrote:
> > Here's an example of how you might enter an NRPN string to control
> Brightness (cutoff
> > frequency):
> >
> > 9874Non-Reg LSB
> > 9900 Non-Reg MSB
> > 60...127Data MSB
> > 380...127Data LSB
> >
>>
> Jon,
>
> Thanks for your reply. I'm not sure where you're getting 74 for the
> LSB. Isn't it 20(Hex) or 32 according to the chart?
32 is for Bank Select. 74 is Brightness
Either way, I'm
> not able to get it to work with the BCR2000 for some reason. I think
> that perhaps the MSB (01) isn't getting passed as such, and there's
> no place to enter it as a stand-alone value. Is it possible that
> somehow the MSB and LSB are combined to form a single value (much
> greater than 127)? I've posted this question on the Behringer site,
> but I haven't received a response from them...
I downloaded a copy of their JAVA app, B-Control Editor, but I don't own either hardware
device...try this:
In the B-Control Editor, in the field for 'NRPN no.' select 98 then type 74 immediately
following it so it reads 9874.
I believe you will have to enter 127 for the 'Maximum' value in the left hand column for the
full range of values of 0-127.
Jon