--- In
AN1x-list@yahoogroups.com, "the_gloriousbride" <the_gloriousbride@...> wrote:
>
> there may be a previous thread on this, but I have done lots of searching, and to no
avail. I
> run os x and have a copy of sysex librarian. I've tried to send the 'london' sounds to my
an1x
> several times. Sysex says the info is sending. My motu traveler even says that midi
> information is moving. But the midi information does not appear to register with my
an1x.
Hi Brian,
I'm running Mac OS X 10.4.8 and using SysEx Librarian v1.1 I am able to load the
LONDON.MID file into my AN1x using an Emagic MT4 USB MIDI Interface.
I'm going to ask the obvious: did you check your MIDI Cable connections are correct? Are
both MIDI cables are good?
When you perform the bulk dump to your AN1x, does anything appear on the AN1x
display?
In SysEx Librarian Preferences, I have the following settings - perhaps these will work for
you too -
Under 'General':
Pause between played messages 154 milliseconds
SysEx receive timeout 1 second
Under 'Transmit Speed':
Each Port is set to 100% 3125 Bytes/sec
Let me know how it goes.
Regards,
Jon