Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [AN1x] Synchronization problem

From: Jeff <jf.serviere@...>
Date: 2006-10-12

Jon a écrit :

>--- In AN1x-list@yahoogroups.com, Ondrash Daree <ondrash77@...>
>wrote:
>
>
>>
>>Hello friends.
>>
>>I have a
>>problem with synchronization between An1x and Cubase SX3.
>>
>>
>Synchronization has lost.
>
>
>>I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio
>>
>>
>as MIDI. When I press Play in SX3 and record MIDI events (I have
>chosen an Arp.preset) AN1x plays with
>
>
>>same tempo like Cubase but without accuracy timing. I have tried
>>
>>
>to record arpeggio
>
>
>>events and they are not aligned to the grid. I have found out,
>>
>>
>that my AN1x LEDs (on a
>
>
>>panel) occasionally blinked. It is strange… Could you help me with
>>
>>
>this issue?
>
>
>>I know that An1x needs good power supply. I use AC adaptor with
>>
>>
>800mA. Is it
>
Hello !
On mine the "scene" LEDs blink sometimes ... don't care , it is not a
failure but more likely a minor bug, it depends on the current patch..
The stock power supply is rated at 12V DC - 700 mA : 800 is enough. In
fact the external supply is only a transformer and a rectifier bridge,
the voltage regulation circuits are inside the synth . And they are (i
think..) reliable . With mostly digital electronics if one voltage is
missing or too low nothing works .
@+
J.F.

>
>
>>OK?
>>
>>
>>
>>Many Thanks.
>>
>>Ondrash
>>
>>
>
>Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the
>Arp/Seq to MIDI Clock from your sequencer. If your suffering from
>drift, try beginning the sequencer a measure or two earlier to allow
>time for the AN1x to 'catch up' and stay in sync.
>
>
>If you are using a multi-port MIDI Interface with many devices, I'd
>suggest you move the AN1x to a higher number port to avoide any
>delay resulting from MIDI slop.
>
>Regards,
>
>Jon
>
>Regards,
>
>Jon
>
>
>
>
>Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
> http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>
>Yahoo! Groups Links
>
>
>




---
avast! Antivirus: message Sortant propre.
Base de donnÚes des virus (VPS): 0641-3, 12/10/2006
Test du: 12/10/2006 23:08:58
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.com