--- In
AN1x-list@yahoogroups.com, "spiramus2006" <spiramus2006@...>
wrote:
>
> Hi guys...new to the group....The issue is that my sustain pedal
does not work with the
> an1x...I suspect it must be a polarity issue...however I don't seem
to be able to find the
> polarity section in the an1x in order to change it.....Any
ideas?...thank you...spiramus
>
There is no polarity setting on the AN1x :-(
Double check a) you have the pedal plugged into the right jack and b)
the FS and FC settings under Utility Control are set accordingly.
Don't recall the default settings off the top of my head, will double
check later...
Otherwise you are probably right and the polarity of your pedal does
not match the AN1x.
Jon