--- In
AN1x-list@yahoogroups.com, Ondrash Daree <ondrash77@...>
wrote:
>
>
>
> Hello friends.
>
> I have a
> problem with synchronization between An1x and Cubase SX3.
Synchronization has lost.
> I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio
as MIDI. When I press Play in SX3 and record MIDI events (I have
chosen an Arp.preset) AN1x plays with
> same tempo like Cubase but without accuracy timing. I have tried
to record arpeggio
> events and they are not aligned to the grid. I have found out,
that my AN1x LEDs (on a
> panel) occasionally blinked. It is strangeĀ
Could you help me with
this issue?
> I know that An1x needs good power supply. I use AC adaptor with
800mA. Is it
> OK?
>
>
>
> Many Thanks.
>
> Ondrash
Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the
Arp/Seq to MIDI Clock from your sequencer. If your suffering from
drift, try beginning the sequencer a measure or two earlier to allow
time for the AN1x to 'catch up' and stay in sync.
If you are using a multi-port MIDI Interface with many devices, I'd
suggest you move the AN1x to a higher number port to avoide any
delay resulting from MIDI slop.
Regards,
Jon
Regards,
Jon