Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [AN1x] Ribbon Controller Problem

From: "Jon" <jondl_2000@...>
Date: 2006-10-08

--- In AN1x-list@yahoogroups.com, Ed Edwards <edward.edwards@...> wrote:
> Jon,
> I'm afraid that this question wasn't ever solved with a solid answer. An obvious
experiment would be to A/B a couple of patches; one should perform "correctly" and not
return to center and one should do the nasty. I'll get on my AN1x later and see if I can
find any patch that performs "correctly".

I searched through some of the list archive and found two of the major discussions from
2005 & 2003. I found the part where we had this discussion:

> ∗∗ One note beyond - I run my AN1x in "mode 2" for the MIDI data because there are a
few functions that work better with a guitar synth. IIRC someone said that the MIDI mode
may have been the cause of this strange ribbon unpredictability.
>

but I can't find the thread where I distinctly recall reproducing the error in an exchange
with you. IIRC, chaning the active voice and then back again cleared the issue temporarily
or something along those lines...?!?! Won't have time to test until tomorrow.

C'ya

Jon