Hello Lou !
when i assign the mod wheel as i've described previously the sounds
changes "continuously" between both scenes . It's like having a balance
pot . Of course when the wheel is fully up or down you will hear only
scene 1 or scene 2 ; a foot pedal will do the same . Scene select must
be done by a simple push button , just as the switches on the front panel .
@+
J.F.
lou.kadassy a écrit :
>I'm not sure it will work (I've not tried yet because I don't have a
>momentary switch handy). However, the transition you're talking about
>should still take place when I change the switch state from ON to OFF:
>I chose an on/off switch simply because I don't want to keep a pedal
>pressed all the time.
>
>I tried assigning MW to SceneSel and I noticed that when the MW is at
>zero the first scene gets selected, moving it about halfway selects
>the second scene and moving it all the way up selects both scenes. So
>I suspect that a continuous controller (and a certain amount of foot
>dexterity) might be necessary.
>Anyone has first-hand experience on this?
>
>Thanks very much for your help,
>Lou
>
>
>--- In AN1x-list@yahoogroups.com, Jeff <jf.serviere@...> wrote:
>
>
>>>I'm using an "on/off" switch, maybe a temporary one (sustain pedal
>>>type) will do the trick?
>>>
>>>
>>>
>>YES ! OF COURSE ! Because the hardware inside your synth is "waiting
>>for" an edge (transition between the "1" and "0" state or the opposite)
>>, not a logic level (1 or 0) to toggle between the 2 scenes . Take a
>>look at all the buttons on the front panel : they are all momentary
>>switches .
>>@+
>>J.F.
>>
>>lou.kadassy a écrit :
>>
>>
>>
>>>--- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@> wrote:
>>>
>>>
>>>
>>>
>>>>--- In AN1x-list@yahoogroups.com, "lou.kadassy" <lou.kadassy@> wrote:
>>>>
>>>>
>>>>
>>>>
>>>>>I thought it would be easy to use a footswitch to, ahem, "switch"
>>>>>between scenes, but I haven't been able to do that.
>>>>>
>>>>>My question is: can I use a foot switch (or continuous foot
>>>>>controller, aka volume pedal) to switch between scene 1/2? I don't
>>>>>want to morph, I just need to switch.
>>>>>
>>>>>Any help would be appreciated.
>>>>>
>>>>>Lou
>>>>>
>>>>>
>>>>>
>>>>>
>>>>Yes, to both.
>>>>
>>>>On the AN1x, set the [EDIT ROTARY] Knob to the UTILITY/SETUP menu.
>>>>
>>>>Press Ctrl Device until you see FS displayed.
>>>>
>>>>Press Ctrl No to change the value to 3: SceneSel
>>>>
>>>>Press Ctrl Device until you see SCENE displayed, the Ctrl No value
>>>>
>>>>
>>>>
>>>>
>>>should also be 3:
>>>
>>>
>>>
>>>
>>>>SceneSel. If it's not, press Ctrl No to change the value to 3:
>>>>
>>>>
>SceneSel.
>
>
>>>>Play your sound, presee the Foot Switch (FS) to hear the 2nd Scene,
>>>>
>>>>
>>>>
>>>>
>>>release to hear the 1st
>>>
>>>
>>>
>>>
>>>>Scene. There is no Morphing invoked when using FS.
>>>>
>>>>Repeat the above procedure for using a Foot Controller (FC).
>>>>
>>>>
>>>>
>>>>
>>>Obviously, Morphing can be
>>>
>>>
>>>
>>>
>>>>used with FC and you can have both FS and FC available
>>>>
>>>>
>>>>
>>>>
>>>simultaneously. Might get
>>>
>>>
>>>
>>>
>>>>confusing if you use the AN1x as a Master Control Keyboard ;-)
>>>>
>>>>Hope this helps.
>>>>
>>>>Regards,
>>>>
>>>>Jon
>>>>
>>>>
>>>>
>>>>
>>>>
>>>Jon,
>>>many thanks for your response.
>>>
>>>Unfortunately, it doesn't work as I expected. Did all the steps but
>>>when I press the switch ∗both∗ scene lights go on and I listen to a
>>>mix between the two.
>>>I'm using an "on/off" switch, maybe a temporary one (sustain pedal
>>>type) will do the trick?
>>>
>>>Thanks again,
>>>Lou
>>>
>>>
>>>
>>>
>>>
>>>
>>>Community email addresses:
>>> Post message: AN1x-list@yahoogroups.com
>>> Subscribe: AN1x-list-subscribe@yahoogroups.com
>>> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
>>> List owner: AN1x-list-owner@yahoogroups.com
>>>
>>>Shortcut URL to this page:
>>> http://groups.yahoo.com/group/AN1x-list
>>>
>>>The AN1x Control Synthesizer FAQ::
>>> http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>>>
>>>Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>---------------------------------------------------------------------------------------
>>
>>
>>>Orange vous informe que cet e-mail a ete controle par l'anti-virus
>>>
>>>
>mail.
>
>
>>>Aucun virus connu a ce jour par nos services n'a ete detecte.
>>>
>>>
>>>
>>>
>>>
>>>---
>>>avast! Antivirus: message Entrant propre.
>>>Base de donnÚes des virus (VPS): 0637-1, 13/09/2006
>>>Test du: 14/09/2006 18:08:19
>>>avast! - copyright (c) 2000-2006 ALWIL Software.
>>>http://www.avast.com
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>---
>>avast! Antivirus: message Sortant propre.
>>Base de donnÚes des virus (VPS): 0637-1, 13/09/2006
>>Test du: 14/09/2006 19:18:25
>>avast! - copyright (c) 2000-2006 ALWIL Software.
>>http://www.avast.com
>>
>>
>>
>
>
>
>
>
>
>Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
> http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>---------------------------------------------------------------------------------------
>Orange vous informe que cet e-mail a ete controle par l'anti-virus mail.
>Aucun virus connu a ce jour par nos services n'a ete detecte.
>
>
>
>
>
>---
>avast! Antivirus: message Entrant propre.
>Base de donnÚes des virus (VPS): 0637-1, 13/09/2006
>Test du: 14/09/2006 23:54:33
>avast! - copyright (c) 2000-2006 ALWIL Software.
>http://www.avast.com
>
>
>
>
>
>
---
avast! Antivirus: message Sortant propre.
Base de donnÚes des virus (VPS): 0637-1, 13/09/2006
Test du: 15/09/2006 07:50:03
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.com