--- In
AN1x-list@yahoogroups.com, "lou.kadassy" <lou.kadassy@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@> wrote:
> >
> > --- In AN1x-list@yahoogroups.com, "lou.kadassy" <lou.kadassy@> wrote:
> > > I thought it would be easy to use a footswitch to, ahem, "switch"
> > > between scenes, but I haven't been able to do that.
> > >
> > > My question is: can I use a foot switch (or continuous foot
> > > controller, aka volume pedal) to switch between scene 1/2? I don't
> > > want to morph, I just need to switch.
> > >
> > > Any help would be appreciated.
> > >
> > > Lou
> >
> > Yes, to both.
> >
> > On the AN1x, set the [EDIT ROTARY] Knob to the UTILITY/SETUP menu.
> >
> > Press Ctrl Device until you see FS displayed.
> >
> > Press Ctrl No to change the value to 3: SceneSel
> >
> > Press Ctrl Device until you see SCENE displayed, the Ctrl No value
> should also be 3:
> > SceneSel. If it's not, press Ctrl No to change the value to 3: SceneSel.
> >
> > Play your sound, presee the Foot Switch (FS) to hear the 2nd Scene,
> release to hear the 1st
> > Scene. There is no Morphing invoked when using FS.
> >
> > Repeat the above procedure for using a Foot Controller (FC).
> Obviously, Morphing can be
> > used with FC and you can have both FS and FC available
> simultaneously. Might get
> > confusing if you use the AN1x as a Master Control Keyboard ;-)
> >
> > Hope this helps.
> >
> > Regards,
> >
> > Jon
> >
>
> Jon,
> many thanks for your response.
>
> Unfortunately, it doesn't work as I expected. Did all the steps but
> when I press the switch ∗both∗ scene lights go on and I listen to a
> mix between the two.
It works just fine here.
Select both Scene switches so they are active and try again. Make certain the Layer value
for your Voice is Single. I'm using a Yamaha FC-5 Square Style Foot Switch Normally
Closed.
Jon