--- In
AN1x-list@yahoogroups.com, "Jon" <jondl_2000@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "lou.kadassy" <lou.kadassy@> wrote:
> > I thought it would be easy to use a footswitch to, ahem, "switch"
> > between scenes, but I haven't been able to do that.
> >
> > My question is: can I use a foot switch (or continuous foot
> > controller, aka volume pedal) to switch between scene 1/2? I don't
> > want to morph, I just need to switch.
> >
> > Any help would be appreciated.
> >
> > Lou
>
> Yes, to both.
>
> On the AN1x, set the [EDIT ROTARY] Knob to the UTILITY/SETUP menu.
>
> Press Ctrl Device until you see FS displayed.
>
> Press Ctrl No to change the value to 3: SceneSel
>
> Press Ctrl Device until you see SCENE displayed, the Ctrl No value
should also be 3:
> SceneSel. If it's not, press Ctrl No to change the value to 3: SceneSel.
>
> Play your sound, presee the Foot Switch (FS) to hear the 2nd Scene,
release to hear the 1st
> Scene. There is no Morphing invoked when using FS.
>
> Repeat the above procedure for using a Foot Controller (FC).
Obviously, Morphing can be
> used with FC and you can have both FS and FC available
simultaneously. Might get
> confusing if you use the AN1x as a Master Control Keyboard ;-)
>
> Hope this helps.
>
> Regards,
>
> Jon
>
Jon,
many thanks for your response.
Unfortunately, it doesn't work as I expected. Did all the steps but
when I press the switch ∗both∗ scene lights go on and I listen to a
mix between the two.
I'm using an "on/off" switch, maybe a temporary one (sustain pedal
type) will do the trick?
Thanks again,
Lou