Doe this occur only when you turn the control/data encoder to a new position? If so, then the encoder just need to be cleaned or replaced......all my later Yamaha synth gear have encoder issues when they get dirty as they are not sealed controls....
Bob
El Segundo, CA
-----Original Message-----
>From: Arthur Alexander Crichton <ac010b4919@...>
>Sent: Sep 11, 2006 6:22 PM
>To: AN1x-list@yahoogroups.com
>Subject: Re: [AN1x] Another problem with AN1x
>
>I am beginning to wonder if the problem is due to a bug in my AN1x
>as its very tempremental - one minute the sounds are ok with the VCF
>cutoff behaving itself and then the next minute they are sounding
>strange with the VCF cutoff going back to value 97 when I try to
>turn it to value 0 and so on.
>
>
>Arthur
>
>
>--- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@...> wrote:
>>
>> --- In AN1x-list@yahoogroups.com, "Arthur Alexander Crichton"
><ac010b4919@>
>> wrote:
>> >
>> > Thanks for all of the replies but I have noticed that when I do
>an
>> > entire factory reset and load the original sounds the problem is
>> > solved until I load in the sounds from AN1xEdit again where I
>get
>> > the problem again with the VCF cutoff behaving very strangly.
>> >
>> > I wonder if its the sounds that I am sending from AN1xEdit to my
>> > AN1x which is causing the problem with the VCF cutoff?
>>
>> Which bank of user Voices are you loading into the AN1x? And did
>ou download the bank
>> from the Files section for AN1x-list here at Yahoo! GRoups or
>elsewhere?
>>
>>
>> > Another thing I have found out is that I created a sweep sound
>on
>> > the AN1x and saved it to AN1xEdit on my computer. When I go to
>load
>> > that sound back to my AN1x from the computer it doesn't sound
>like
>> > it should because the VCF cutoff goes crazy.
>>
>> Why don't you load an example in .AN1 formate into the Voices
>directory of the Files
>> section so we can see what
>> s up?
>>
>> http://launch.groups.yahoo.com/group/AN1x-list/files
>>
>>
>> Jon
>>
>
>
>
>
>