--- In
AN1x-list@yahoogroups.com, "Summa" <flotorian@...> wrote:
>
> Sorry, I just recognised that I picked the wrong table, it wasn't the CC table,
> so Pulswidth isn't avaiable via a predefined controller... :( But it's still
No, your first answer was correct. On page 132 of the AN200 Owner's Manual is the
Control Matrix & Free EG Track Parameter List.
Any programable Real Time controller, i.e., Mod Wheel, Foot pedal, Ribbon Controller, etc.
can be used to transmit the necessary CC to the AN200 affecting PWM for VCO1 and/or
VCO2 or utilizing the Mod Matrix as you initially described below...
> > --- In AN1x-list@yahoogroups.com, "Summa" <flotorian@> wrote:
> > >
> > > According to page 132 of the manual it should be cc#16 vor Osc1
> > and cc#22 for
> > > Osc2, if everything fails you should be able to use the mod-matrix
> > to assign a
> > > controller one or even both of the parameters...
> > >
> > > On 7 Feb 2006 at 22:27, digitaldisko wrote:
> > >
> > > > Huh..i never thought of that. I do have a little midi
> > > > keyboard...but how would I go about sending a midi message to
> > that
> > > > parameter? What is the midi number for those parameters also?
regards,
Jon