[sdiy] High impedance measurement buffer for audio?

[Mattias Rickardsson]

Hi all,

I often probe around in both audio circuits, power circuits and other
circuits. I often want to direct the probed signal both to an audio
interface and to measurement equipments like oscilloscopes. But when the
test point is sensitive, I don't want to load it and affect the signal.

Do you have any good recommendations for a device solving these needs:

- High impedance measurement input for a +/- 20V range
- Buffered outputs to both audio & lab equipment simultaneously
- No gain needed
- Very low noise and low THD needed, it shouldn't degrade the signal before
going to my high-end audio interface
- High bandwidth preferred, far higher than audio

Could be a commercial product or a custom-built solution. Are you aware of
any obvious solution that I've missed? Or is the low-noise low-THD
requirement a tricky thing here? :-)

/mr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20261026/6847e81a/attachment.htm>