[sdiy] 3U Eurorack modules in a 1U rack

[cheater cheater]

at such volumes it's worth ordering it cut with laser or water jet. or cnc.

On Tue, Jul 28, 2026 at 9:02 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
>
> 3D printing wouldn't ground the units so would have to mess around with green wires 🙁
>
> ________________________________
> From: H.Sergio Alves <theatomlabspt at gmail.com>
> Sent: 28 July 2026 19:49
> To: cheater cheater <cheater00social at gmail.com>
> Cc: Mike Bryant <mbryant at futurehorizons.com>; synth-diy at synth-diy.org <synth-diy at synth-diy.org>
> Subject: Re: [sdiy] 3U Eurorack modules in a 1U rack
>
> 3D printing to the rescue :)
>
> On Tue, 28 Jul 2026 at 19:48, cheater cheater via Synth-diy <synth-diy at synth-diy.org> wrote:
>
> no, but I've recently thought about this, and it seems like you should
> be able to set this up with just "joiner" brackets. I suggest getting
> some L brackets for that purpose, and just join the modules back to
> back (or top to bottom). then at the extremes, you'd have to make some
> plates to extend the three modules to the width of a 19" rack's
> mounting holes. That's not really difficult and you should be able to
> do a good job of it with a hand drill.
>
> On Tue, Jul 28, 2026 at 8:24 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
> >
> > Does anyone know of any pre-built metalwork to allow 3 3U Eurorack modules of up to 8HP to be securely mounted horizontally side by side across the width of a 1U rack unit ?
> >
> > Yes I know the labels will all be on their sides, but not a problem.
> > ________________________________________________________
> > This is the Synth-diy mailing list
> > Submit email to: Synth-diy at synth-diy.org
> > View archive at: https://synth-diy.org/pipermail/synth-diy/
> > Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> > Selling or trading? Use marketplace at synth-diy.org
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org