[sdiy] 3U Eurorack modules in a 1U rack

[Mike Bryant]

3D printing wouldn't ground the units so would have to mess around with green wires 🙁

________________________________
From: H.Sergio Alves <theatomlabspt at gmail.com>
Sent: 28 July 2026 19:49
To: cheater cheater <cheater00social at gmail.com>
Cc: Mike Bryant <mbryant at futurehorizons.com>; synth-diy at synth-diy.org <synth-diy at synth-diy.org>
Subject: Re: [sdiy] 3U Eurorack modules in a 1U rack

3D printing to the rescue :)

On Tue, 28 Jul 2026 at 19:48, cheater cheater via Synth-diy <synth-diy at synth-diy.org<mailto:synth-diy at synth-diy.org>> wrote:
no, but I've recently thought about this, and it seems like you should
be able to set this up with just "joiner" brackets. I suggest getting
some L brackets for that purpose, and just join the modules back to
back (or top to bottom). then at the extremes, you'd have to make some
plates to extend the three modules to the width of a 19" rack's
mounting holes. That's not really difficult and you should be able to
do a good job of it with a hand drill.

On Tue, Jul 28, 2026 at 8:24 PM Mike Bryant <mbryant at futurehorizons.com<mailto:mbryant at futurehorizons.com>> wrote:
>
> Does anyone know of any pre-built metalwork to allow 3 3U Eurorack modules of up to 8HP to be securely mounted horizontally side by side across the width of a 1U rack unit ?
>
> Yes I know the labels will all be on their sides, but not a problem.
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org<mailto:Synth-diy at synth-diy.org>
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org<mailto:marketplace at synth-diy.org>

________________________________________________________
This is the Synth-diy mailing list
Submit email to: Synth-diy at synth-diy.org<mailto:Synth-diy at synth-diy.org>
View archive at: https://synth-diy.org/pipermail/synth-diy/
Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use marketplace at synth-diy.org<mailto:marketplace at synth-diy.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260728/bb1c9d04/attachment.htm>