[sdiy] Blank Frac Rack Panel Supplier?

[ShedSynth]

Hi Paul,
I get blank panels made by JLCPCB on aluminium/white PCB material intended
for COB heatsinks.
I design on Kicad with slots cut, "ShedSynth" logo and centre-lines
screenprinted on the back (actually the front when you're plotting the PCB)
to help when I drill them for whatever module I'm making.
In the UK, getting 10 or 20 blank panels worked out as cheap as buying a
sheet of aluminium from a local store and making a terrible job of cutting
it up myself.
I have also had a couple of panels ready-drilled/printed for specific
modules which turned out nicely.

[re-posted without image]

-----Original Message-----
From: Synth-diy <mailto:synth-diy-bounces at synth-diy.org> On Behalf Of Paul
McLean via Synth-diy
Sent: 15 August 2026 19:13
To: mailto:synth-diy at synth-diy.org
Subject: [sdiy] Blank Frac Rack Panel Supplier?

Folks,

I find myself expanding my DIY Frac Rack system with some new projects. My
stash of PAiA-sourced blank panels is running dry.
PAiA.com is currently more-or-less shut down (not clear that it's ever
coming back :(.

Are there other sources of blank Frac Rack panels out there somewhere?
My searching has only turned up pre-drilled panels for specific commercial
projects.

Any ideas?

Thanks,
Paul McLean
Colorado, USA
________________________________________________________
This is the Synth-diy mailing list
Submit email to: mailto:Synth-diy at synth-diy.org View archive at:
https://synth-diy.org/pipermail/synth-diy/
Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use mailto:marketplace at synth-diy.org