[sdiy] FET to short pedal input?

[chris]

And don't forget the bipolar level shifting for the 4066 control signal


Chris


On 29/11/2025 08:52, Tom Wiltshire wrote:
> +1 agree, absolutely this. 4066 or similar is simple and obvious. The 
> only thing preventing it working is the power requirement.
>
>> On 28 Nov 2025, at 22:20, brianw <brianw at audiobanshee.com> wrote:
>>
>> Frankly, I suspect that the goal of not providing independent power 
>> to this interface circuit is making it much more difficult. 
>> Personally, I would build a small circuit board to fit inside the ARP 
>> Odyssey and pull power from the synth. Then, all voltages would 
>> surely fall within the workable range for a 4066.
>
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to:Synth-diy at synth-diy.org
> View archive at:https://synth-diy.org/pipermail/synth-diy/
> Check your settings at:https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Usemarketplace at synth-diy.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20251129/408e6dab/attachment.htm>