[sdiy] Mitxela combined knob & socket

[Mattias Rickardsson]

That said, it COULD potentially be quite useful and nifty in some other
system where parameters are EITHER set fixed with knobs OR fully remote
controlled by patched CV cables from somewhere.
It could also be used for (audio) signals and their levels/routing, instead
of parameters and control.

Not sure what system that would be, though.
Preferably something where the patched cables could come from anywhere,
since it would otherwise be easier to use switches to select between known
sources.
And something where it's worth throwing money on the Hall/magnet/uC/bespoke
knob tech.

/mr


Den mån 9 juni 2025 23:35Eric Brombaugh via Synth-diy <
synth-diy at synth-diy.org> skrev:

> This exactly. Cool tech, but not well aligned with the needs of control
> voltage systems.
>
> Eric
>
> On 6/9/25 2:27 PM, Mattias Rickardsson wrote:
> > Nice engineering, but... misunderstood?
> > Parameters almost always need
> >
> >     value + control signal*amount
> >
> > I've never encountered a parameter where I'd be okay with removing the
> > parameter value setting and replace it with a CV at full amplitude. 🙂
> >
> > /mr
> >
> >
> > Den mån 9 juni 2025 02:46Ben Stuyts via Synth-diy <synth-diy at synth-
> > diy.org <mailto:synth-diy at synth-diy.org>> skrev:
> >
> >     This is just great: https://youtu.be/dLw2QQdOLaM <https://youtu.be/
> >     dLw2QQdOLaM>
> >
> >     I’m not sure how useful it would be in practice, or how wel it would
> >     stand the test of time. (As he says so himself.) But I’m very
> >     impressed by the concept. One of those things that seems obvious
> >     once you’ve seen it, but being the first to come up with this is
> >     extremely impressive to me. Or has anything like this been done
> before?
> >
> >     More info here: https://mitxela.com/projects/euroknob <https://
> >     mitxela.com/projects/euroknob>
> >
> >     Ben
> >
> >
> >     ________________________________________________________
> >     This is the Synth-diy mailing list
> >     Submit email to: Synth-diy at synth-diy.org <mailto:Synth-diy at synth-
> >     diy.org>
> >     View archive at: https://synth-diy.org/pipermail/synth-diy/
> >     <https://synth-diy.org/pipermail/synth-diy/>
> >     Check your settings at: https://synth-diy.org/mailman/listinfo/
> >     synth-diy <https://synth-diy.org/mailman/listinfo/synth-diy>
> >     Selling or trading? Use marketplace at synth-diy.org
> >     <mailto:marketplace at synth-diy.org>
> >
> >
> > ________________________________________________________
> > This is the Synth-diy mailing list
> > Submit email to: Synth-diy at synth-diy.org
> > View archive at: https://synth-diy.org/pipermail/synth-diy/
> > Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> > Selling or trading? Use marketplace at synth-diy.org
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250610/5b1c07dc/attachment.htm>