[sdiy] UV Printer (Face Panels)

[H.Sergio Alves]

I'm yet to try it with these pals... but their pedal enclosures are
delicious and sharp! gonna sk them prices for the panels (me supplying
aluminium blanks)

https://gojira.co.uk/uv-printing/


On Sat, 21 Jun 2025 at 18:47, Terry Bowman via Synth-diy <
synth-diy at synth-diy.org> wrote:

>
> On Jun 20, 2025, at 8:43 PM, Paul Perry via Synth-diy <
> synth-diy at synth-diy.org> wrote:
>
> Possibly the cheapest - but probably not the "best" - UV panel route would
> be via those
> services that "print your photo on metal". I have not seen examples with
> small text, which might be the killer.
>
>
> You can laser engrave many metals especially with a fiber laser and
> galvos. The resolution is high so small text and minute details are no
> problem. Note that aluminum can only be marked by sintering.
>
> Here's the new kid on the block, a gantry laser with galvos! Here's a
> lousy demo of it in action:
>
> https://youtu.be/ysyEqE8RM6U
>
> No one else has this, certainly not at a price mere mortals can afford.
>
> Roly Automation has been well ahead of the curve for over two years. They
> ship the whole unit assembled and calibrated at the the factory. There''s
> nothing to dial in except for the power and speed for each material.
>
> And it comes with ALL the additional gadgets you actually NEED. The other
> generic 400mm^2 engraver manufacturers are scrambling to catch up.
>
> I have their Mk1 model from the first batch they shipped and it works
> perfectly. I paid $1050 for it. Prices have gone up but now you get a
> switchable 10W/20W laser module.
>
>
> Terry Bowman, KA4HJH
> "The Mac Doctor"
>
> https://www.astarcloseup.com
>
> #1: There is no substitute for good tools;
>
> #2: Always use the right tool for the job.
>
> Linn Westcott, editor emeritus, *Model Railroader* magazine
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250819/28de1287/attachment.htm>