November 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Nov 1 00:06:53 CET 2011
Ending: Wed Nov 30 12:22:43 CET 2011
Messages: 394

• [sdiy] LAG circuit de-tuning VCO question   ASSI
• [sdiy] LAG circuit de-tuning VCO question   ASSI
• [sdiy] WTB:CEM3379   Altitude
• [sdiy] Fabrication/machining   Altitude
• [sdiy] FS: Rockit 8 bit synth   Altitude
• [sdiy] Sal-MAR Construction?   David Anderson
• [sdiy] (no subject)   David Anderson
• [sdiy] Hard Sync on DCOs   Florian Anwander
• [sdiy] Hohner C86 info anyone?   Florian Anwander
• [sdiy] Simple voltage controlled clock/counter   Florian Anwander
• [sdiy] Jupiter 6 experts?   Florian Anwander
• [sdiy] Jupiter 6 experts?   Florian Anwander
• [sdiy] TR-808 DIY Mods   Florian Anwander
• [sdiy] LEDs dying in LCD alphanumeric display   Graham Atkins
• [sdiy] TI SN74LS624N, worth buying?   Graham Atkins
• [sdiy] Harmonics Question   Joel B
• [sdiy] PCB etching re-revisited   Ben Barwise
• [sdiy] ventilation for soldering   Mike Beauchamp
• [sdiy] [AH] FS: Rockit 8 bit synth   Mike Beauchamp
• [sdiy] Pitch detector Envelope follower!   Harry Bissell
• [sdiy] Pitch detector Envelope follower!   Harry Bissell
• [sdiy] Harmonics Question   Harry Bissell
• [sdiy] Harmonics Question   Harry Bissell
• [sdiy] LEDs dying in LCD alphanumeric display   Harry Bissell
• [sdiy] LEDs dying in LCD alphanumeric display   Harry Bissell
• [sdiy] LEDs dying in LCD alphanumeric display   Harry Bissell
• [sdiy] SVF excellent errors?   Harry Bissell
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   Harry Bissell
• [sdiy] slightly OT: solid state power amp topologies   Harry Bissell
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Harry Bissell
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Harry Bissell
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Harry Bissell
• [sdiy] korg monotron and connection to electret mic input   Harry Bissell
• [sdiy] korg monotron and connection to electret mic input   Harry Bissell
• [sdiy] ventilation for soldering   Harry Bissell
• [sdiy] DC 'bounce' in second order filters   Harry Bissell
• [sdiy] DC 'bounce' in second order filters   Harry Bissell
• [sdiy] fischertechnik coil winding machine   Eric Brombaugh
• [sdiy] Raspberry Pi   Eric Brombaugh
• [sdiy] Raspberry Pi   Eric Brombaugh
• [sdiy] Raspberry Pi   Eric Brombaugh
• [sdiy] Rotary encoder response   Eric Brombaugh
• [sdiy] PIC freakout?   Eric Brombaugh
• [sdiy] Buchla Pulser - Crossfader- Timbre Generator module   Dave Brown
• [sdiy] Hard Sync on DCOs   Rainer Buchty
• [sdiy] CEM 3328s for sale / Ensoniq motherboards   Rainer Buchty
• [sdiy] SMF format -- how to store arrangement data?   Rainer Buchty
• [sdiy] Korg KPR-77 Service Manual   Tom Bugs
• [sdiy] F/S UK - Aoyue SMD Tweezers & Fume extractors - super cheap   Tom Bugs
• [sdiy] F/S UK - Aoyue SMD Tweezers & Fume extractors - super cheap   Tom Bugs
• [sdiy] Hard Sync on DCOs   Richie Burnett
• [sdiy] Hard Sync on DCOs   Richie Burnett
• [sdiy] TLC272 trouble   Richie Burnett
• [sdiy] Integer exponential envelope generation   Richie Burnett
• [sdiy] PIC freakout?   Richie Burnett
• [sdiy] TR-808 DIY Mods   Richie Burnett
• [sdiy] making PCB's with PNP blue   ChristianH
• [sdiy] SVF excellent errors?   ChristianH
• [sdiy] TLC272 trouble   ChristianH
• [sdiy] Spring Reverb?   Jim Coursey
• [sdiy] SVF High Pass Mode not Cutting Off   Magnus Danielson
• [sdiy] SVF High Pass Mode not Cutting Off   Magnus Danielson
• [sdiy] Harmonics Question   Magnus Danielson
• [sdiy] Test   Magnus Danielson
• [sdiy] RIP: Dennis Ritchie   Magnus Danielson
• [sdiy] TI SN74LS624N, worth buying?   Magnus Danielson
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   Magnus Danielson
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   Magnus Danielson
• [sdiy] Limiting current through 74-series 4051   Magnus Danielson
• [sdiy] DC 'bounce' in second order filters   Magnus Danielson
• [sdiy] Hohner C86 info anyone?   Ingo Debus
• [sdiy] fischertechnik coil winding machine   Ingo Debus
• [sdiy] TLC272 trouble   Ingo Debus
• [sdiy] TLC272 trouble   Ingo Debus
• [sdiy] 74xx series - what to do with them?   Ingo Debus
• [sdiy] [OT] Cox Sucker. They're shutting down my site.   Julien Delgoulet
• [sdiy] Electronics magazine scans..   Jean-Pierre Desrochers
• [sdiy] Electronics magazine scans..   Jean-Pierre Desrochers
• [sdiy] making PCB's with PNP blue   David G Dixon
• [sdiy] Harmonics Question   David G Dixon
• [sdiy] old MFOS oscilaator using a CA3080 and a CA3046   David G Dixon
• [sdiy] Test   David G Dixon
• [sdiy] LAG circuit de-tuning VCO question   David G Dixon
• [sdiy] Test   David G Dixon
• [sdiy] Simple voltage controlled clock/counter   David G Dixon
• [sdiy] SVF excellent errors?   David G Dixon
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   David G Dixon
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   David G Dixon
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   David G Dixon
• [sdiy] TLC272 trouble   David G Dixon
• [sdiy] TLC272 trouble   David G Dixon
• [sdiy] Jim Williams' Workbench   David G Dixon
• [sdiy] Jim Williams' Workbench   David G Dixon
• [sdiy] making PCB's with PNP blue   Louis van Dompselaar
• [sdiy] Fake CEM3374?   Louis van Dompselaar
• [sdiy] Fake CEM3374?   Louis van Dompselaar
• [sdiy] TR-808 DIY Mods   Louis van Dompselaar
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Bruce Duncan
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Bruce Duncan
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Bruce Duncan
• [sdiy] Rotary encoder response   Bruce Duncan
• [sdiy] SVF excellent errors?   Karl Ekdahl
• [sdiy] SVF excellent errors?   Karl Ekdahl
• [sdiy] PIC freakout?   Karl Ekdahl
• [sdiy] PIC freakout?   Karl Ekdahl
• [sdiy] ventilation for soldering   Karl Ekdahl
• [sdiy] RIP: Dennis Ritchie   James Elliott
• [sdiy] Raspberry Pi   David Evans
• [sdiy] Dream ... Anybody?   Tom Farrand
• [sdiy] Dream ... Anybody?   Tom Farrand
• [sdiy] Jupiter 6 experts?   Eric Frampton
• [sdiy] Jupiter 6 experts?   Eric Frampton
• [sdiy] Jupiter 6 experts?   Eric Frampton
• [sdiy] Jupiter 6 experts?   Eric Frampton
• [sdiy] another Jupiter 6 question   Eric Frampton
• [sdiy] another Jupiter 6 question   Eric Frampton
• [sdiy] Raspberry Pi   Gabbe
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Olivier Gillet
• [sdiy] LEDs dying in LCD alphanumeric display   Olivier Gillet
• [sdiy] Integer exponential envelope generation   Olivier Gillet
• [sdiy] DDR SDRAM Sound Sample   Scott Gravenhorst
• [sdiy] Integer exponential envelope generation   Scott Gravenhorst
• [sdiy] Bulk Standoffs?   David Griffith
• [sdiy] Simple voltage controlled clock/counter   Matthias Herrmann-DEU
• [sdiy] Roland D-550 Service Manual   Colin Hinz
• [sdiy] ventilation for soldering   Colin Hinz
• [sdiy] Jim Williams' Workbench   Colin Hinz
• [sdiy] finding Lecaine schematics? anyone from canada?   Colin Hinz
• [sdiy] Getting into the hobby (was: TI SN74LS624N, worth buying?)   John Alex Hvidlykke
• [sdiy] TI SN74LS624N, worth buying?   John Alex Hvidlykke
• [sdiy] CEM3340 Black Friday Sale   David Ingebretsen
• [sdiy] LEDs dying in LCD alphanumeric display   Adam Inglis
• [sdiy] LEDs dying in LCD alphanumeric display   Adam Inglis
• [sdiy] LEDs dying in LCD alphanumeric display   Adam Inglis
• [sdiy] Sal-MAR Construction?   Adam Inglis
• [sdiy] TR-808 DIY Mods   Adam Inglis
• [sdiy] Wavetek 182A Function Generator   Byron G. Jacquot
• [sdiy] Synth DIY 2012 weekend -- 21/22nd July   Neil Johnson
• [sdiy] LAG circuit de-tuning VCO question   Neil Johnson
• [sdiy] LAG circuit de-tuning VCO question   Neil Johnson
• [sdiy] LAG circuit de-tuning VCO question   Neil Johnson
• [sdiy] Test   Neil Johnson
• [sdiy] TI SN74LS624N, worth buying?   Neil Johnson
• [sdiy] TLC272 trouble   Neil Johnson
• [sdiy] TLC272 trouble   Neil Johnson
• [sdiy] Raspberry Pi   Neil Johnson
• [sdiy] Dream ... Anybody?   Neil Johnson
• [sdiy] Latest Rapid offer: Free delivery on all orders over £10 - until Christmas!   Neil Johnson
• [sdiy] TI SN74LS624N, worth buying?   Bob K
• [sdiy] TI SN74LS624N, worth buying?   Bob K
• [sdiy] TI SN74LS624N, worth buying?   Bob K
• [sdiy] TI SN74LS624N, worth buying?   Bob K
• [sdiy] [AH] Lower cost / free shipping offer at Jameco   Bob K
• [sdiy] ventilation for soldering   Bob K
• [sdiy] ventilation for soldering   Bob K
• [sdiy] Spring Reverb?   KA4HJH
• [sdiy] CEM3340 Black Friday Sale   KA4HJH
• [sdiy] CEM3340 Black Friday Sale   KA4HJH
• [sdiy] Pitch detector Envelope follower!   KD KD
• [sdiy] Pitch detector Envelope follower!   KD KD
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   KD KD
• [sdiy] making PCB's with PNP blue   KD KD
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   KD KD
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   KD KD
• [sdiy] RasberryPI   KD KD
• [sdiy] Test   KD KD
• [sdiy] Pitch detector Envelope follower!   KD KD
• [sdiy] PIC32MX220F032B   KD KD
• [sdiy] Fake CEM3374?   KD KD
• [sdiy] [OT] Cox Sucker. They're shutting down my site.   BARRY KLEIN
• [sdiy] Raspberry Pi   BARRY KLEIN
• [sdiy] 14-bit MIDI CCs - common, or rare?   Dave Kendall
• [sdiy] 14-bit MIDI CCs - common, or rare?   Dave Kendall
• [sdiy] LAG circuit de-tuning VCO question   Dave Kendall
• [sdiy] LAG circuit de-tuning VCO question   Dave Kendall
• [sdiy] LAG circuit de-tuning VCO question   Dave Kendall
• [sdiy] LAG circuit de-tuning VCO question   Dave Kendall
• [sdiy] LAG circuit de-tuning VCO question   Dave Kendall
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Dave Kendall
• [sdiy] PIC freakout?   Dave Kendall
• [sdiy] RasberryPI   Barry Klein
• [sdiy] Buchla Easel boards purchasing contact info   Lanterman, Aaron
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   Lanterman, Aaron
• [sdiy] finding Lecaine schematics? anyone from canada?   Lanterman, Aaron
• [sdiy] LAG circuit de-tuning VCO question   Oren Leavitt
• [sdiy] TI SN74LS624N, worth buying?   Oren Leavitt
• [sdiy] TI SN74LS624N, worth buying?   Steve Lenham
• [sdiy] Jupiter 6 experts?   Steve Lenham
• [sdiy] Jupiter 6 experts?   Steve Lenham
• [sdiy] Raspberry Pi   Gabriel Lindeborg
• [sdiy] cool old books on recording or electronic studios?   John Loffink
• [sdiy] Bulk Standoffs?   John Luciani
• [sdiy] [OT] IC pins named after persons?   Kent H Lundberg
• [sdiy] LEDs dying in LCD alphanumeric display   MTG
• [sdiy] LEDs dying in LCD alphanumeric display   MTG
• [sdiy] Fabrication/machining   MTG
• [sdiy] Test   Paul Maddox
• [sdiy] Test   Paul Maddox
• [sdiy] Test   Paul Maddox
• [sdiy] Hard Sync on DCOs   Paul Maddox
• [sdiy] Hard Sync on DCOs   Paul Maddox
• [sdiy] [OT] Cox Sucker. They're shutting down my site.   Paul Maddox
• [sdiy] Raspberry Pi   Paul Maddox
• [sdiy] Raspberry Pi   Paul Maddox
• [sdiy] Raspberry Pi   Paul Maddox
• [sdiy] PIC freakout?   Paul Maddox
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Andre Majorel
• [sdiy] Test   Andre Majorel
• [sdiy] 74xx series - what to do with them?   Dave Manley
• [sdiy] Bulk Standoffs?   George Mattson
• [sdiy] Jim Williams' Workbench   Per Mattsson
• [sdiy] MM5824 Replacement   J.D. McEachin
• [sdiy] LEDs dying in LCD alphanumeric display   J.D. McEachin
• [sdiy] Harmonics Question   Veronica Merryfield
• [sdiy] PIC freakout?   Veronica Merryfield
• [sdiy] op amps [was: Re: TI SN74LS624N, worth buying?]   Chris Muir
• [sdiy] (no subject)   Needham, Alan
• [sdiy] (no subject)   Needham, Alan
• [sdiy] Hard Sync on DCOs   Scott Nordlund
• [sdiy] Simple voltage controlled clock/counter   Justin Owen
• [sdiy] Simple voltage controlled clock/counter   Justin Owen
• [sdiy] Simple voltage controlled clock/counter   Justin Owen
• [sdiy] DDR SDRAM Sound Sample   Tim Parkhurst
• [sdiy] LAG circuit de-tuning VCO question   Tim Parkhurst
• [sdiy] TI SN74LS624N, worth buying?   Tim Parkhurst
• [sdiy] Parts for shields   Tim Parkhurst
• [sdiy] Jupiter 6 experts?   Tim Parkhurst
• [sdiy] Lower cost / free shipping offer at Jameco   Tim Parkhurst
• [sdiy] Bulk Standoffs?   Tim Parkhurst
• [sdiy] Fabrication/machining   Tim Parkhurst
• [sdiy] CEM3340 Black Friday Sale   Tim Parkhurst
• [sdiy] TI SN74LS624N, worth buying?   James Patchell
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Gordon JC Pearce
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Gordon JC Pearce
• [sdiy] FTGH stuff for spares or repair   Gordon JC Pearce
• [sdiy] W30 bits - either wanted or ftgh   Gordon JC Pearce
• [sdiy] Hard Sync on DCOs   Gordon JC Pearce
• [sdiy] another Jupiter 6 question   Gordon JC Pearce
• [sdiy] another Jupiter 6 question   Gordon JC Pearce
• [sdiy] Integer exponential envelope generation   Gordon JC Pearce
• [sdiy] scope sort of on the fritz   Gordon JC Pearce
• [sdiy] (no subject)   Mike Pepper
• [sdiy] Pitch detector Envelope follower!   Paul Perry
• [sdiy] making PCB's with PNP blue   Paul Perry
• [sdiy] LAG circuit de-tuning VCO question   Paul Perry
• [sdiy] Simple voltage controlled clock/counter   Paul Perry
• [sdiy] Fabrication/machining   Paul Perry
• [sdiy] Sal-MAR Construction?   Paul Perry
• [sdiy] Test   Ullrich Peter
• [sdiy] 74xx series - what to do with them?   Nils Pipenbrinck
• [sdiy] Jim Williams' Workbench   Stewart Pye
• [sdiy] Harmonics Question   Mattias Rickardsson
• [sdiy] SVF High Pass Mode not Cutting Off   Mattias Rickardsson
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Mattias Rickardsson
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Mattias Rickardsson
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Mattias Rickardsson
• [sdiy] Harmonics Question   Mattias Rickardsson
• [sdiy] Limiting current through 74-series 4051   Mark Rivera
• [sdiy] Limiting current through 74-series 4051   Mark Rivera
• [sdiy] Fabrication/machining   Brock Russell
• [sdiy] Vocoder Manual.   Oscar Salas
• [sdiy] 19" Rack Cases.   Oscar Salas
• [sdiy] Test   Jay Schwichtenberg
• [sdiy] TI SN74LS624N, worth buying?   Jay Schwichtenberg
• [sdiy] PIC freakout?   Jay Schwichtenberg
• [sdiy] making PCB's with PNP blue   Quick Silver
• [sdiy] OT: Cubase for sale??   Andrew Simper
• [sdiy] Harmonics Question   Andrew Simper
• [sdiy] Hard Sync on DCOs   Andrew Simper
• [sdiy] making PCB's with PNP blue   Matthew Smith
• [sdiy] making PCB's with PNP blue   Matthew Smith
• [sdiy] making PCB's with PNP blue   Matthew Smith
• [sdiy] LEDs dying in LCD alphanumeric display   Matthew Smith
• [sdiy] Simple voltage controlled clock/counter   Matthew Smith
• [sdiy] Parts for shields   Matthew Smith
• [sdiy] Rotary encoder response   Matthew Smith
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Dan Snazelle
• [sdiy] making PCB's with PNP blue   Dan Snazelle
• [sdiy] RasberryPI   Dan Snazelle
• [sdiy] old MFOS oscilaator using a CA3080 and a CA3046   Dan Snazelle
• [sdiy] Hard Sync on DCOs   Dan Snazelle
• [sdiy] TI SN74LS624N, worth buying?   Dan Snazelle
• [sdiy] Parts for shields   Dan Snazelle
• [sdiy] TLC272 trouble   Dan Snazelle
• [sdiy] TLC272 trouble   Dan Snazelle
• [sdiy] Sal-MAR Construction?   Dan Snazelle
• [sdiy] Fabrication/machining   Dan Snazelle
• [sdiy] LAG circuit de-tuning VCO question   Oakley Sound
• [sdiy] FS: Roland CR5000 and CR8000 drum voice boards   Oakley Sound
• [sdiy] Harmonics Question   Kyle Stephens
• [sdiy] old MFOS oscilaator using a CA3080 and a CA3046   Kyle Stephens
• [sdiy] Jupiter 6 experts?   Doug Terrebonne
• [sdiy] Fake CEM3374?   Doug Terrebonne
• [sdiy] Jupiter 6 experts?   Doug Terrebonne
• [sdiy] Jupiter 6 experts?   Doug Terrebonne
• [sdiy] [AH] Lower cost / free shipping offer at Jameco   Doug Terrebonne
• [sdiy] CEM3340 Black Friday Sale   Doug Terrebonne
• [sdiy] Harmonics Question   Donald Tillman
• [sdiy] San Francisco Bay Area Synth Meetup   Donald Tillman
• [sdiy] San Francisco Bay Area Synth Meetup (postponed)   Donald Tillman
• [sdiy] Jim Williams' Workbench   Donald Tillman
• [sdiy] Startup in Silicon Valley   Donald Tillman
• [sdiy] DC 'bounce' in second order filters   Donald Tillman
• [sdiy] PSU... +15v -15v   Antonio Tuzzi
• [sdiy] PSU... +15v -15v   Antonio Tuzzi
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   Noah Vawter
• [sdiy] making PCB's with PNP blue   Noah Vawter
• [sdiy] PCB etching re-revisited   Noah Vawter
• [sdiy] Raspberry Pi   Noah Vawter
• [sdiy] CEM 3328s for sale / Ensoniq motherboards   Noah Vawter
• [sdiy] Roland D-550 Service Manual   Arne Wangen
• [sdiy] LEDs dying in LCD alphanumeric display   Giles Ward
• [sdiy] Roland D-550 Service Manual   Bob Weigel
• [sdiy] Hohner C86 info anyone?   Bob Weigel
• [sdiy] Hohner C86 info anyone?   Bob Weigel
• [sdiy] Fake CEM3374?   Bob Weigel
• [sdiy] Fake CEM3374?   Bob Weigel
• [sdiy] Fake CEM3374?   Bob Weigel
• [sdiy] Fake CEM3374?   Bob Weigel
• [sdiy] FS: Emu SP1200 w/ SSM Filter   Thomas White
• [sdiy] MeeBlip   Tom Wiltshire
• [sdiy] making PCB's with PNP blue   Tom Wiltshire
• [sdiy] Harmonics Question   Tom Wiltshire
• [sdiy] LAG circuit de-tuning VCO question   Tom Wiltshire
• [sdiy] LAG circuit de-tuning VCO question   Tom Wiltshire
• [sdiy] LAG circuit de-tuning VCO question   Tom Wiltshire
• [sdiy] PIC32MX220F032B   Tom Wiltshire
• [sdiy] PIC32MX220F032B   Tom Wiltshire
• [sdiy] TI SN74LS624N, worth buying?   Tom Wiltshire
• [sdiy] Hard Sync on DCOs   Tom Wiltshire
• [sdiy] Hard Sync on DCOs   Tom Wiltshire
• [sdiy] Hard Sync on DCOs   Tom Wiltshire
• [sdiy] Hard Sync on DCOs   Tom Wiltshire
• [sdiy] Hard Sync on DCOs   Tom Wiltshire
• [sdiy] Simple voltage controlled clock/counter   Tom Wiltshire
• [sdiy] Fake CEM3374?   Tom Wiltshire
• [sdiy] Fake CEM3374?   Tom Wiltshire
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Tom Wiltshire
• [sdiy] Jupiter 6 experts?   Tom Wiltshire
• [sdiy] Rotary encoder response   Tom Wiltshire
• [sdiy] ventilation for soldering   Tom Wiltshire
• [sdiy] CEM3340 Black Friday Sale   Tom Wiltshire
• [sdiy] 74xx series - what to do with them?   Terje Winther
• [sdiy] Wavetek 182A Function Generator   Terje Winther
• [sdiy] TI SN74LS624N, worth buying?   Eric Wood
• [sdiy] making PCB's with PNP blue   aankrom
• [sdiy] making PCB's with PNP blue   aankrom
• [sdiy] old MFOS oscilaator using a CA3080 and a CA3046   aankrom
• [sdiy] Karaoke echo chips and those pitch-shifting megaphones...   aankrom
• [sdiy] Buchla Easel boards purchasing contact info   aankrom
• [sdiy] PCB etching re-revisited   aankrom
• [sdiy] slightly OT: solid state power amp topologies   aankrom
• [sdiy] Sprague 15D tantalum caps   aankrom
• [sdiy] slightly OT: solid state power amp topologies   aankrom
• [sdiy] Spring Reverb?   aankrom
• [sdiy] Wavetek 182A Function Generator   aankrom
• [sdiy] test   aankrom
• [sdiy] Wavetek 182A Function Generator   aankrom
• [sdiy] korg monotron and connection to electret mic input   aankrom
• [sdiy] korg monotron and connection to electret mic input   aankrom
• [sdiy] korg monotron and connection to electret mic input   aankrom
• [sdiy] scope sort of on the fritz   aankrom
• [sdiy] scope sort of on the fritz   aankrom
• [sdiy] Jim Williams' Workbench   aankrom
• [sdiy] Jim Williams' Workbench   aankrom
• [sdiy] Dream ... Anybody?   aankrom
• [sdiy] CEM3340 Black Friday Sale   aankrom
• [sdiy] CEM3340 Black Friday Sale   aankrom
• [sdiy] CEM3340 Black Friday Sale   aankrom
• [sdiy] CEM3340 Black Friday Sale   aankrom
• [sdiy] [OT] IC pins named after persons?   aankrom
• [sdiy] Fabrication/machining   jays at aracnet.com
• [sdiy] TI SN74LS624N, worth buying?   blacet at blacet.com
• [sdiy] Blacet Black Friday Sale: DIY TM PCBs 50% Off   blacet at blacet.com
• [sdiy] making PCB's with PNP blue   Colin f
• [sdiy] 14-bit MIDI CCs - common, or rare?   Colin f
• [sdiy] 14-bit MIDI CCs - common, or rare?   Colin f
• [sdiy] Op amps (was Re: TI SN74LS624N, worth buying?)   Colin f
• [sdiy] Rotary encoder response   Colin f
• [sdiy] 5u cnc panels for sale (oakley etc) (...and some 19" and euro too!)   julian fincham
• [sdiy] 19" Rack Cases.   julian fincham
• [sdiy] PCB etching re-revisited   peter foti
• [sdiy] Normal service has been resumed   rick
• [sdiy] OT: Cubase for sale??   dan snazelle
• [sdiy] Peter Forrests A to Z of Analog Synthesizers and Keyfax   dan snazelle
• [sdiy] TLC272 trouble   dan snazelle
• [sdiy] Spring Reverb?   dan snazelle
• [sdiy] big proto boards?   dan snazelle
• [sdiy] Bulk Standoffs?   dan snazelle
• [sdiy] ventilation for soldering   dan snazelle
• [sdiy] LIST ARCHIVES ???   dan snazelle
• [sdiy] CEM3340 Black Friday Sale   dan snazelle
• [sdiy] Freescale announces a new ARM Product based upon Cortex A5 and Cortex M4   thx1138
• [sdiy] fischertechnik coil winding machine   mark verbos

Last message date: Wed Nov 30 12:22:43 CET 2011
Archived on: Fri Apr 1 13:40:29 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...