November 2008 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Nov 1 14:44:15 CET 2008
Ending: Thu Nov 20 19:19:58 CET 2008
Messages: 577

• [sdiy] PCB layout question   Derek Holzer
• [sdiy] PCB layout question   Luc Hondareyte
• [sdiy] PCB layout question   Ian Fritz
• [sdiy] PCB layout question   Paul Anderson
• [sdiy] Rhodes stage 73 question   jeff brown
• [sdiy] PCB layout question   mark verbos
• [sdiy] Vestax multipole potentiometers   mark verbos
• [sdiy] PCB layout question   mark verbos
• [sdiy] PCB layout question   Paul Schreiber
• [sdiy] PCB layout question   Paul Perry
• [sdiy] Starting a Four Pole Filter in an FPGA.....   Jim Patchell
• [sdiy] Re-amping device   bill bigrig
• [sdiy] PCB layout question   David G. Dixon
• [sdiy] Re-amping device   mark verbos
• [sdiy] Fizmo sysex documentation   David Cornutt
• [sdiy] Re-amping device   Paul Perry
• [sdiy] Anybody seen a Vaco Orchestron?   Bob Weigel
• [sdiy] PCB layout question   Paul Perry
• [sdiy] Hi, I am a cowboy!   Thomas Hudson
• [sdiy] PCB layout question   Paul Schreiber
• [sdiy] Hi, I am a cowboy!   Travis Shire
• [sdiy] Anybody seen a Vaco Orchestron?   ASSI
• [sdiy] Starting a Four Pole Filter in an FPGA.....   ASSI
• [sdiy] PCB layout question   ASSI
• [sdiy] PCB layout question   Ian Fritz
• [sdiy] PCB layout question   Seb Francis
• [sdiy] PCB layout question   Paul Perry
• [sdiy] PCB layout question   Paul Anderson
• [sdiy] Fizmo sysex documentation   Ben Lincoln
• [sdiy] Fizmo sysex documentation   BrightBoy
• [sdiy] PCB layout question   ASSI
• [sdiy] Starting a Four Pole Filter in an FPGA.....   Jim Patchell
• [sdiy] Starting a Four Pole Filter in an FPGA.....   Antti Huovilainen
• [sdiy] Re-amping device   Tom Wiltshire
• [sdiy] Re-amping device   John Mahoney
• [sdiy] Hi, I am a cowboy!   Pete Niedermayr
• [sdiy] Hi, I am a cowboy!   Pete Niedermayr
• [sdiy] Disassembling MKS-70 Power Supply   Csaba Zvekan
• [sdiy] Kits for synth modules?   Paul Anderson
• [sdiy] Kits for synth modules?   Aaron Lanterman
• [sdiy] Kits for synth modules?   Ian Fritz
• [sdiy] Kits for synth modules?   Paul Schreiber
• [sdiy] Kits for synth modules?   Greg James
• [sdiy] Kits for synth modules?   David Ingebretsen
• [sdiy] Kits for synth modules?   Scott Juskiw
• [sdiy] Mixers?   Tom Arnold
• [sdiy] Mixers?   mark verbos
• RE: [sdiy] Mixers?   rdrake
• [sdiy] SCI Six-Trak   mark verbos
• [sdiy] I'm a Cowboy   Pete Niedermayr
• [sdiy] Mixers?   Scott Juskiw
• [sdiy] I'm a Cowboy   Travis Shire
• [sdiy] Disassembling MKS-70 Power Supply   Bob Weigel
• [sdiy] Kits for synth modules?   Yves Usson
• [sdiy] Ondes Martenot being played at the Royal Festival Hall London   dragons
• [sdiy] SCI Six-Trak   Steve Lenham
• [sdiy] SCI Six-Trak   Bob Weigel
• [sdiy] slightly OT - K2000 CD ROMS from a MAC   Dave Kendall
• [sdiy] Any interest in brand new EDP Wasp pots?   Julian
• [sdiy] PCB layout question   Derek Holzer
• [sdiy] Getting hold of CA3280's   Tom Wiltshire
• [sdiy] three way switch question   Dan Snazelle
• [sdiy] three way switch question   Dan Snazelle
• [sdiy] three way switch question   Gergo Palatinszky
• [sdiy] Disassembling MKS-70 Power Supply   Csaba Zvekan
• [sdiy] easy way to reduce synth levels to guitar FX Levels?   Dan Snazelle
• [sdiy] three way switch question   Tom Bugs
• [sdiy] easy way to reduce synth levels to guitar FX Levels?   Tom Bugs
• [sdiy] Kits for synth modules?   David Ingebretsen
• [sdiy] Xpander PSU problem (¿PSU rev 2.0?)   Sergio Villar Koval
• [sdiy] PCB layout question   ASSI
• [sdiy] three way switch question   mark verbos
• [sdiy] Oscillator question   Antti Pitkämäki
• [sdiy] A transformer question.   Tom Bugs
• [sdiy] Disassembling MKS-70 Power Supply   Bob Weigel
• [sdiy] Getting hold of CA3280's   Louis van Dompselaar
• [sdiy] A transformer question.   Bob Weigel
• [sdiy] A transformer question.   Tom Bugs
• [sdiy] Eagle Parts   paul.maddox.mail-list at synth.net
• [sdiy] Disassembling MKS-70 Power Supply   Dino Leone
• [sdiy] Oscillator question   Magnus Danielson
• [sdiy] Eagle Parts   Anthony Rolando
• [sdiy] A transformer question.   Simon Brouwer
• [sdiy] Eagle Parts   jays at aracnet.com
• [sdiy] Disassembling MKS-70 Power Supply   mark verbos
• [sdiy] Oscillator question   Paul Perry
• [sdiy] Oscillator question   Magnus Danielson
• [sdiy] A transformer question.   Bob Weigel
• [sdiy] Brass etching using inkjet paper or press-n-peel?   mcb, inc.
• [sdiy] ARP pro-soloist oddity or..am I just totally missing it? 74150?   Bob Weigel
• [sdiy] Can Old Yellowing Panel Text Be Whitened?   Ken Elhardt
• [sdiy] Orbital Powered Sander Behavior?   Ken Elhardt
• [sdiy] Orbital Powered Sander Behavior?   David Ingebretsen
• [sdiy] Eagle Parts   Ullrich Peter
• [sdiy] Orbital Powered Sander Behavior?   Ken Elhardt
• [sdiy] Eagle Parts   Jason Tribbeck
• [sdiy] Orbital Powered Sander Behavior?   Jason Tribbeck
• [sdiy] Analog Synthesizer Builders' Summit 2008 in Tokyo   Naoki Iwakami
• [sdiy] ARP pro-soloist oddity or..am I just totally missing it? 74150?   ChristianH
• [sdiy] ARP pro-soloist oddity or..am I just totally missing it? 74150?   Bob Weigel
• [sdiy] A transformer question.   Tom Wiltshire
• [sdiy] A transformer question.   Jason Tribbeck
• [sdiy] A transformer question.   Tom Wiltshire
• [sdiy] A transformer question.   Tom Bugs
• [sdiy] MOTM power connector?   Derek Holzer
• [sdiy] MOTM power connector?   Louis van Dompselaar
• [sdiy] cv summer question   Dan Snazelle
• [sdiy] MOTM power connector?   Derek Holzer
• [sdiy] MOTM power connector?   Tom Bugs
• [sdiy] A transformer question.   Graham Atkins
• [sdiy] A transformer question.   Jason Tribbeck
• [sdiy] buffers   Scott Gravenhorst
• [sdiy] potentiometers wanted suitable for moog prodigy knobs   Florian Anwander
• [sdiy] buffers   Dan Snazelle
• [sdiy] Hi, I am a cowboy!   harrybissell at wowway.com
• [sdiy] buffers   johnspeth at yahoo.com
• [sdiy] PCB layout question   harrybissell at wowway.com
• [sdiy] PCB layout question   harrybissell at wowway.com
• [sdiy] PCB layout question   David G. Dixon
• [sdiy] easy way to reduce synth levels to guitar FX Levels?   Paul Anderson
• [sdiy] A transformer question.   Needham, Alan
• [sdiy] easy way to reduce synth levels to guitar FX Levels?   Antti Huovilainen
• [sdiy] Op-Amp One-Shot/Pulse schematic   Justin Owen
• [sdiy] ARP pro-soloist oddity or..am I just totally missing it? 74150?   Bob Weigel
• [sdiy] Simmons SDC 200 Electronic Drum Amp up for grabs   Seb Francis
• [sdiy] Can Old Yellowing Panel Text Be Whitened?   Scott Juskiw
• [sdiy] white noise from resistor?   Paul Perry
• [sdiy] white noise from resistor?   Magnus Danielson
• [sdiy] white noise from resistor?   harrybissell at wowway.com
• [sdiy] white noise from resistor?   Tom Wiltshire
• [sdiy] white noise from resistor?   Tim Daugard
• [sdiy] white noise from resistor?   HOSHUYAMA
• [sdiy] white noise from resistor?   G L Hearn
• [sdiy] white noise from resistor?   Tim Daugard
• [sdiy] white noise from resistor?   Steffen Juul
• [sdiy] Synthi joystick pots   Louis van Dompselaar
• [sdiy] Can Old Yellowing Panel Text Be Whitened?   Ken Elhardt
• [sdiy] Synthi joystick pots   Travis Thatcher
• [sdiy] Korg Poly 61 mod help   Travis Thatcher
• [sdiy] Korg Poly 61 mod help   Tom Wiltshire
• [sdiy] Synthi joystick pots   flightofharmony
• [sdiy] wiring is hard!! advice?   Dan Snazelle
• [sdiy] Synthi joystick pots   Mike
• RE: [sdiy] wiring is hard!! advice?   rdrake
• [sdiy] wiring is hard!! advice?   Pete
• [sdiy] wiring is hard!! advice?   nicolas
• [sdiy] Synthi joystick pots   Tom Arnold
• [sdiy] wiring is hard!! advice?   Jim Patchell
• [sdiy] Synthi joystick pots   flightofharmony
• [sdiy] Eagle library   paul.maddox.mail-list at synth.net
• [sdiy] Eagle library   jays at aracnet.com
• [sdiy] wiring is hard!! advice?   Mike
• [sdiy] Synthi joystick pots   Louis van Dompselaar
• [sdiy] PCB Copper Area Add-on   Stavros Gregoriou
• [sdiy] Synthi joystick pots   Louis van Dompselaar
• [sdiy] Synthi joystick pots   Louis van Dompselaar
• [sdiy] PCB Copper Area Add-on   Jason Tribbeck
• [sdiy] Synthi joystick pots   Louis van Dompselaar
• [sdiy] Synthi joystick pots   Neil Johnson
• [sdiy] white noise from resistor?   Paul Perry
• [sdiy] Roland system 100 knob trade   geoff james
• [sdiy] Roland system 100 knob trade   Florian Anwander
• [sdiy] PCB Copper Area Add-on   Ingo Debus
• [sdiy] PCB Copper Area Add-on   Ingo Debus
• [sdiy] Re-amping device   Ken Luke
• [sdiy] Georgia Tech Center for Music Technology, and Aaron posing with an MOTM   Aaron Lanterman
• [sdiy] Something Different   Graham Atkins
• [sdiy] preliminary schematics for subtle chorus are online   JH.
• [sdiy] PCB Copper Area Add-on   Jason Tribbeck
• [sdiy] asm2 vco problems   Dan Snazelle
• [sdiy] asm2 vco problems   Dave Magnuson
• [sdiy] asm2 vco problems   Dan Snazelle
• [sdiy] asm2 vco problems   Magnus Danielson
• [sdiy] asm2 vco problems   Dan Snazelle
• [sdiy] asm2 vco problems   Ian Fritz
• [sdiy] Multiple USB Keyboards   Pete Niedermayr
• [sdiy] asm2 vco problems   Magnus Danielson
• [sdiy] asm2 vco problems   Magnus Danielson
• [sdiy] gate delay   Jason Proctor
• [sdiy] Looking for schematic for simple percussive envelope generator   Adam Schabtach
• [sdiy] Looking for schematic for simple percussive envelope generator   mark verbos
• [sdiy] ISD voice recorder IC is NOISY!!   peter edwards
• [sdiy] Looking for schematic for simple percussive envelope generator   Dave Leith
• [sdiy] ISD voice recorder IC is NOISY!!   Kyle Stephens
• [sdiy] PCB drill size tolerance   Justin Owen
• [sdiy] PCB drill size tolerance   John Luciani
• [sdiy] PCB drill size tolerance   Merv Thomas
• [sdiy] Driving LEDs   mark verbos
• [sdiy] Driving LEDs   Paul Perry
• [sdiy] Bi-Color LED Question   Scott Gravenhorst
• [sdiy] Bi-Color LED Question   Ken Elhardt
• [sdiy] Bi-Color LED (What Brand/Model Does the Moogerfooger Use?)   Ken Elhardt
• [sdiy] Bi-Color LED Question   Ken Elhardt
• [sdiy] [OT] MIT Museum   John Luciani
• [sdiy] +15 -15 DC Power supply, adding +5 DC   Cory Scott
• [sdiy] +15 -15 DC Power supply, adding +5 DC   mark verbos
• [sdiy] +15 -15 DC Power supply, adding +5 DC   harrybissell at wowway.com
• [sdiy] +15 -15 DC Power supply, adding +5 DC   Cory Scott
• [sdiy] +15 -15 DC Power supply, adding +5 DC   harrybissell at wowway.com
• [sdiy] +15 -15 DC Power supply, adding +5 DC   Simon Brouwer
• [sdiy] good sliders for synth diy?   Julian
• [sdiy] good sliders for synth diy?   Tom Arnold
• [sdiy] fast-attack EGs and trigger sync   mcb, inc.
• [sdiy] good sliders for synth diy?   Adam Schabtach
• [sdiy] fast-attack EGs and trigger sync   John Mahoney
• [sdiy] fast-attack EGs and trigger sync   mcb, inc.
• [sdiy] good modular kit for a noob?   jpitt at fhcrc.org
• [sdiy] fast-attack EGs and trigger sync   mark verbos
• [sdiy] good sliders for synth diy?   Florian Anwander
• [sdiy] fast-attack EGs and trigger sync   Florian Anwander
• [sdiy] good sliders for synth diy?   Justin Owen
• [sdiy] fast-attack EGs and trigger sync   Richard Wentk
• [sdiy] fast-attack EGs and trigger sync   Seb Francis
• [sdiy] fast-attack EGs and trigger sync   Colin f
• [sdiy] fast-attack EGs and trigger sync   John Mahoney
• [sdiy] fast-attack EGs and trigger sync   Florian Anwander
• [sdiy] good modular kit for a noob?   Sam Ecoff
• [sdiy] fast-attack EGs and trigger sync   Richard Wentk
• [sdiy] good sliders for synth diy?   ASSI
• [sdiy] good modular kit for a noob?   John Blacet
• [sdiy] good modular kit for a noob?   David Ingebretsen
• [sdiy] good modular kit for a noob?   Derek Holzer
• Re: [sdiy] good modular kit for a noob?   rdrake
• [sdiy] good modular kit for a noob?   Derek Holzer
• [sdiy] Looking to put together Blacet modular synth, where to start?   Paul Anderson
• [sdiy] good modular kit for a noob?   lief codianni
• [sdiy] Looking to put together Blacet modular synth, where to start?   John Blacet
• [sdiy] Component sourcing...   Justin Owen
• [sdiy] Looking to put together Blacet modular synth, where to start?   David Ingebretsen
• [sdiy] 555 ADSR question   nicolas
• [sdiy] Cheap midi to cv converter   Cory Scott
• [sdiy] good sliders for synth diy?   Tom Arnold
• [sdiy] Looking to put together Blacet modular synth, where to start?   Seb Francis
• [sdiy] Looking to put together Blacet modular synth, where to start?   Jason Proctor
• [sdiy] LFO's showing up on VCO   Dan Snazelle
• [sdiy] Looking to put together Blacet modular synth, where to start?   Paul Anderson
• [sdiy] Looking to put together Blacet modular synth, where to start?   Jason Proctor
• [sdiy] good sliders for synth diy?   Tom Bugs
• [sdiy] LFO's showing up on VCO   Sean Ellis
• [sdiy] fast-attack EGs and trigger sync   mcb, inc.
• [sdiy] tr808 start/stop trigger switch   jovius
• [sdiy] Cheap midi to cv converter   Mikhail Novikov
• [sdiy] fast-attack EGs and trigger sync   Donald Tillman
• [sdiy] LFO's showing up on VCO   Simon Brouwer
• [sdiy] f3342pc data?   mark verbos
• [sdiy] LFO's showing up on VCO   Simon Brouwer
• [sdiy] LFO's showing up on VCO   Simon Brouwer
• [sdiy] 555 ADSR question   René Schmitz
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] Maestro Ring Modulator Clone project   Paul Dickow
• [sdiy] tr808 start/stop trigger switch   jovius
• [sdiy] dsPIC33 question..   Simon Brouwer
• [sdiy] dsPIC33 question..   Alwyn Lloyd
• [sdiy] tr808 start/stop trigger switch   Thomas Laskowski
• [sdiy] Yamaha analog and step sequencer   Terje Winther
• [sdiy] tr808 start/stop trigger switch   Graham Atkins
• [sdiy] dsPIC33 question..   Tom Wiltshire
• [sdiy] Yamaha analog and step sequencer   Yves Usson
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] Yamaha analog and step sequencer   Andre Majorel
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] Yamaha analog and step sequencer   Florian Anwander
• [sdiy] dsPIC33 question..   Tom Wiltshire
• [sdiy] SMD part availability, manufacture   John Luciani
• [sdiy] SMD part availability, manufacture   Jason Tribbeck
• [sdiy] SMD part availability, manufacture   Jason Tribbeck
• [sdiy] Re: paia fatman   David Anderson
• [sdiy] dsPIC33 question..   ASSI
• [sdiy] SMD part availability, manufacture   Anthony Rolando
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] Re: paia fatman   John Blacet
• [sdiy] Re: paia fatman   David Anderson
• [sdiy] Yamaha analog and step sequencer   Pete Swarbrick
• [sdiy] dsPIC33 question..   Eric Brombaugh
• [sdiy] Re: paia fatman   Andreas Bygdell
• [sdiy] dsPIC33 question..   Csaba Zvekan
• [sdiy] Re: paia fatman   Bob Weigel
• [sdiy] LFO through PWM   Mikhail Novikov
• [sdiy] LFO through PWM   mark verbos
• [sdiy] LFO through PWM   Derek Holzer
• [sdiy] hello everybody   alf holm
• [sdiy] LFO through PWM   Tom Wiltshire
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] tr808 start/stop trigger switch   Ken Elhardt
• [sdiy] SMD part availability, manufacture   John Luciani
• [sdiy] Stripping RG-174   mrmike
• [sdiy] Kobiconn jack nuts?   Tom Arnold
• [sdiy] Touch Pad controller   David Ingebretsen
• [sdiy] Re: Music Easel balanced modulator on the breadboard   Aaron Lanterman
• [sdiy] dsPIC33 question..   Andre Majorel
• [sdiy] Touch Pad controller   Seb Francis
• [sdiy] Power input for 2xD / generic digital module [was: SMD part availability, manufacture]   Seb Francis
• [sdiy] SMD part availability, manufacture   Neil Johnson
• [sdiy] SMD part availability, manufacture   Ingo Debus
• [sdiy] dsPIC33 question..   ASSI
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] SMD part availability, manufacture   Jason Tribbeck
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] SMD part availability, manufacture   Neil Johnson
• [sdiy] dsPIC33 question..   Eric Brombaugh
• [sdiy] dsPIC33 question..   Seb Francis
• [sdiy] SMD part availability, manufacture   John Luciani
• [sdiy] Power input for 2xD / generic digital module   Seb Francis
• [sdiy] simple PLL frequency-to-voltage converter?   alfred.pear at gmail.com
• [sdiy] SMD part availability, manufacture   Justin Owen
• [sdiy] SMD part availability, manufacture   Seb Francis
• [sdiy] simple PLL frequency-to-voltage converter?   Scott Gravenhorst
• [sdiy] tektronix t992r sdiy?   Nate Reeves
• [sdiy] Another FPGA Synth   Scott Gravenhorst
• [sdiy] Guthman Musical Instrument Competition   Aaron Lanterman
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• [sdiy] Another FPGA Synth   Jim Patchell
• [sdiy] keeping signals seperate..avoiding noise   JH.
• [sdiy] keeping signals seperate..avoiding noise   George Hearn
• [sdiy] keeping signals seperate..avoiding noise   George Hearn
• [sdiy] keeping signals seperate..avoiding noise   nicolas
• [sdiy] keeping signals seperate..avoiding noise   Paul Perry
• [sdiy] keeping signals seperate..avoiding noise   nicolas
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• [sdiy] keeping signals seperate..avoiding noise   Tim Ressel
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• [sdiy] keeping signals seperate..avoiding noise   Laurie Biddulph
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• [sdiy] simple PLL frequency-to-voltage converter?   harrybissell at wowway.com
• [sdiy] hello everybody   alf holm
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment Destroys Gear   Ken Elhardt
• [sdiy] Touch Pad controller   Ken Elhardt
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment DestroysGear   Paul Perry
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   David Ingebretsen
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   John Blacet
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   John Mahoney
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   Scott Juskiw
• [sdiy] Touch Pad controller   Paul Dickow
• [sdiy] Stribe1, Re: Unique control voltage sources...   John Mahoney
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   Ken Elhardt
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment DestroysGear   Ken Elhardt
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   David Ingebretsen
• [sdiy] Touch Pad controller   Steve Ridley
• [sdiy] Touch Pad controller   Romeo Fahl
• [sdiy] Gate input protection   Seb Francis
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   Martin Naef
• [sdiy] Touch Pad controller   Paul Dickow
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   David Ingebretsen
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   Paul Dickow
• [sdiy] Gate input protection   Samppa Tolvanen
• [sdiy] Gate input protection   Eric Brombaugh
• Unique control voltage sources was RE: [sdiy] Touch Pad controller   Kyle Stephens
• [sdiy] Gate input protection   Seb Francis
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] dsPIC CV input protection   Ian Fritz
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment DestroysGear   Nicholas Gregorich
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment Destroys Gear   Scott Nordlund
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment Destroys Gear   Csaba Zvekan
• [sdiy] keeping signals seperate..avoiding noise   nicolas
• [sdiy] dsPIC CV input protection   Tom Wiltshire
• [sdiy] Touch Pad controller   Justin Owen
• [sdiy] Screwed Up LCD Pic? - And East Coast EnvironmentDestroysGear   Paul Perry
• [sdiy] dsPIC CV input protection   Mattias Rickardsson
• [sdiy] Yusynth Transistor filter   dave
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] dsPIC CV input protection   Mattias Rickardsson
• [sdiy] Yusynth Transistor filter   krisp
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] Yusynth Transistor filter   yves usson
• [sdiy] dsPIC CV input protection   Ingo Debus
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] keeping signals seperate..avoiding noise   Robert Lorentz
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment Destroys Gear   ASSI
• [sdiy] keeping signals seperate..avoiding noise   Derek Holzer
• [sdiy] keeping signals seperate..avoiding noise   Dan Snazelle
• RE: RE: [sdiy] keeping signals seperate..avoiding noise   rdrake
• [sdiy] buchla 200e power supply   Derek Holzer
• [sdiy] dsPIC CV input protection   ASSI
• [sdiy] buchla 200e power supply   Magnus Danielson
• [sdiy] buchla 200e power supply   Derek Holzer
• [sdiy] keeping signals seperate..avoiding noise   Justin Owen
• [sdiy] Yusynth Transistor filter   Oakley Sound
• [sdiy] buchla 200e power supply   Seb Francis
• [sdiy] dsPIC CV input protection   Jason Proctor
• [sdiy] keeping signals seperate..avoiding noise   Seb Francis
• [sdiy] Re Yusynth Transistor filter   dave
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] keeping signals seperate..avoiding noise   Adam Schabtach
• [sdiy] keeping signals seperate..avoiding noise   Justin Owen
• [sdiy] dsPIC CV input protection   Simon Brouwer
• [sdiy] keeping signals seperate..avoiding noise   Simon Brouwer
• [sdiy] keeping signals seperate..avoiding noise   Seb Francis
• [sdiy] keeping signals seperate..avoiding noise   Seb Francis
• [sdiy] MIDI with +3.3V supply   Seb Francis
• [sdiy] keeping signals seperate..avoiding noise   Simon Brouwer
• [sdiy] Yusynth Transistor filter   Paul Perry
• [sdiy] MIDI with +3.3V supply   David Brown
• [sdiy] MIDI with +3.3V supply   Seb Francis
• [sdiy] MIDI with +3.3V supply   Simon Brouwer
• [sdiy] dsPIC CV input protection   Mattias Rickardsson
• [sdiy] Screwed Up LCD Pic? - And East Coast Environment Destroys Gear   Ken Elhardt
• [sdiy] keeping signals seperate..avoiding noise   nicolas
• [sdiy] Re: [AH] SMT for PC Boards Assembly info   Tom Farrand
• [sdiy] Music Easel balanced mod, one mystery solved, others remain   Aaron Lanterman
• [sdiy] Yusynth Transistor filter   Oakley Sound
• [sdiy] Yusynth Transistor filter   Paul Perry
• [sdiy] MIDI with +3.3V supply   Neil Johnson
• [sdiy] MIDI with +3.3V supply   Seb Francis
• [sdiy] Yusynth Transistor filter   Simon Brouwer
• [sdiy] MIDI with +3.3V supply   Neil Johnson
• [sdiy] Yusynth Transistor filter   Samppa Tolvanen
• [sdiy] Yusynth Transistor filter   Paul Perry
• [sdiy] Yusynth Transistor filter   Oakley Sound
• [sdiy] Yusynth Transistor filter   Simon Brouwer
• [sdiy] Yusynth Transistor filter   Simon Brouwer
• [sdiy] Yusynth Transistor filter   Simon Brouwer
• [sdiy] MIDI with +3.3V supply   Seb Francis
• [sdiy] Yusynth Transistor filter   Oakley Sound
• [sdiy] Beginners guide to ATMEL programming?   Julian
• [sdiy] Yusynth Transistor filter   Simon Brouwer
• [sdiy] Beginners guide to ATMEL programming?   Tim Ressel
• [sdiy] OT Making transfer letters   David Brown
• [sdiy] Beginners guide to ATMEL programming?   John Luciani
• [sdiy] OT Making transfer letters   Tom Arnold
• [sdiy] Touch Pad controller   Heitor Alves
• [sdiy] Beginners guide to ATMEL programming?   Jim Patchell
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] OT Making transfer letters   David Ingebretsen
• [sdiy] Touch Pad controller   David Ingebretsen
• [sdiy] Xarp-56   Scott Gravenhorst
• [sdiy] Beginners guide to ATMEL programming?   Csaba Zvekan
• [sdiy] Yusynth Transistor filter   Oakley Sound
• [sdiy] Beginners guide to ATMEL programming?   ChristianH
• [sdiy] Beginners guide to ATMEL programming?   ChristianH
• [sdiy] Digital oscillator problem   Tom Wiltshire
• [sdiy] Dual-gang reverse-log pot group buy ?   Andre Majorel
• [sdiy] Xarp-56   Tom Wiltshire
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   flightofharmony
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] keeping signals seperate..avoiding noise   harrybissell at wowway.com
• [sdiy] Digital oscillator problem   Seb Francis
• [sdiy] Digital oscillator problem   Neil Johnson
• [sdiy] keeping signals seperate..avoiding noise   Paul Higgins
• [sdiy] East Coast Environment Destroys Gear   David Anderson
• [sdiy] keeping signals seperate..avoiding noise   harrybissell at wowway.com
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Bruce Duncan
• [sdiy] keeping signals seperate..avoiding noise   harrybissell at wowway.com
• [sdiy] keeping signals seperate..avoiding noise   harrybissell at wowway.com
• [sdiy] Small Gears   Jim Patchell
• Re: [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   rdrake
• [sdiy] dsPIC CV input protection   harrybissell at wowway.com
• Re: [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   rdrake
• [sdiy] Small Gears   Tim Daugard
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Simon Brouwer
• [sdiy] Small Gears   Ian Fritz
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS:RE: Dual-gang reverse-log pot group buy ?)   BRUCE DUNCAN
• [sdiy] dsPIC CV input protection   Seb Francis
• [sdiy] Small Gears   John Mahoney
• [sdiy] Small Gears   mcb, inc.
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS:RE: Dual-gang reverse-log pot group buy ?)   Simon Brouwer
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS:RE: Dual-gang reverse-log pot group buy ?)   Andre Majorel
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Andre Majorel
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   flightofharmony
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Paul Perry
• [sdiy] Six-core 45-nm DSP runs at 1 GHz   John Mahoney
• [sdiy] Small Gears   Jim Patchell
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   David G Dixon
• [sdiy] Why did (does?) Don Buchla like 68K resistors so much?   Aaron Lanterman
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   flightofharmony
• [sdiy] Why did (does?) Don Buchla like 68K resistors so much?   Paul Schreiber
• [sdiy] East Coast Environment Destroys Gear   Ken Elhardt
• [sdiy] Nice and Cheap Little Tool Sets at Home Depot   Ken Elhardt
• [sdiy] Nice and Cheap Little Tool Sets at Home Depot   Ken Elhardt
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   David G. Dixon
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Sean Ellis
• [sdiy] Music Easel ring mod analysis   Aaron Lanterman
• [sdiy] Desoldering/Rework Stations   Andre Majorel
• [sdiy] Desoldering/Rework Stations   Samppa Tolvanen
• [sdiy] Sampler mode...   Justin Owen
• [sdiy] Sampler mode...   Andre Majorel
• [sdiy] Music Easel ring mod analysis   Seb Francis
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Justin Owen
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Justin Owen
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   flightofharmony
• [sdiy] -- what pot brand in the TC m300 ? --   Andrea TONI
• [sdiy] -- what pot brand in the TC m300 ? --   Paul Schreiber
• [sdiy] -- what pot brand in the TC m300 ? --   Andrea TONI
• [sdiy] -- what pot brand in the TC m300 ? --   Samppa Tolvanen
• [sdiy] -- what pot brand in the TC m300 ? --   Andrea TONI
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Andre Majorel
• [sdiy] dsPIC CV input protection   Mattias Rickardsson
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Digital oscillator problem   paul.maddox.mail-list at synth.net
• [sdiy] Sampler mode...   ASSI
• [sdiy] Sampler mode... stereo?   Seb Francis
• [sdiy] Sampler mode... stereo?   Jason Proctor
• [sdiy] digital recording of analog synths: your Pro Tools experience?   rdrake
• [sdiy] digital recording of analog synths: your Pro Tools experience?   Samppa Tolvanen
• [sdiy] Sound problems on Yamaha CP60M electroacoustic piano   Gil W.
• [sdiy] Sampler mode...   Sean Ellis
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Jason Proctor
• [sdiy] Sampler mode...   Andre Majorel
• [sdiy] Sampler mode... stereo?   Andre Majorel
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode...   Seb Francis
• [sdiy] Sampler mode... stereo?   Seb Francis
• [sdiy] Sampler mode... (saving samples)   Seb Francis
• [sdiy] Sampler mode...   Sam Harmon
• [sdiy] buchla 200e power supply   mark verbos
• [sdiy] buchla 200e power supply   Derek Holzer
• [sdiy] Group buys: Alpha-style, dual pots, and Joysticks (WAS: RE: Dual-gang reverse-log pot group buy ?)   Tom Wiltshire
• [sdiy] 2xD / Digital Module .. saving samples   Seb Francis
• [sdiy] 2xD / Digital Module .. wavetable mode   Seb Francis
• [sdiy] 2xD / Digital Module .. saving samples   Jason Tribbeck
• [sdiy] 2xD / Digital Module .. wavetable mode   Louis van Dompselaar
• [sdiy] 2xD / Digital Module .. saving samples   Needham, Alan
• [sdiy] 2xD / Digital Module .. saving samples   Jason Tribbeck
• [sdiy] 2xD / Digital Module .. wavetable mode   Seb Francis
• [sdiy] 2xD / Digital Module .. saving samples   Jason Tribbeck
• [sdiy] 2xD / Digital Module .. saving samples   Seb Francis
• [sdiy] 2xD / Digital Module .. saving samples   Jason Tribbeck
• [sdiy] 2xD / Digital Module .. saving samples   Seb Francis
• [sdiy] 2xD / Digital Module .. saving samples   Jason Tribbeck
• [sdiy] 2xD / Digital Module .. wavetable mode   Tom Wiltshire
• [sdiy] 2xD / Digital Module .. saving samples   Seb Francis
• [sdiy] Sampler mode...   Sean Ellis
• [sdiy] 2xD / Digital Module .. wavetable mode   m.bareille at free.fr
• [sdiy] Korg Polysix - now weirdness   Karl Ekdahl
• [sdiy] Korg Polysix - now weirdness   David Anderson
• [sdiy] Korg Polysix - now weirdness   Doug Terrebonne
• [sdiy] buchla 200e power supply   Derek Holzer
• [sdiy] Korg Polysix - now weirdness   Tom Wiltshire
• [sdiy] Korg Polysix - now weirdness   Ullrich Peter
• [sdiy] Taking pre-orders for Subtle Chorus PCBs now   JH.
• [sdiy] 2xD / Digital Module .. saving samples   Jim Palmer
• [sdiy] Korg Polysix - now weirdness   Bob Weigel
• [sdiy] Sampler mode...   Jim Palmer
• [sdiy] Sampler mode...   Paul Dickow
• [sdiy] Korg Polysix - now weirdness   Karl Ekdahl
• [sdiy] Another protecting inputs question...   Seb Francis
• [sdiy] Another protecting inputs question...   Eric Brombaugh
• [sdiy] Another protecting inputs question...   Seb Francis
• [sdiy] Another protecting inputs question...   Eric Brombaugh
• [sdiy] Another protecting inputs question...   Seb Francis
• [sdiy] digital recording of analog synths: your Pro Tools experience?   Ken Elhardt
• [sdiy] Korg Polysix - now weirdness   Tom Wiltshire
• [sdiy] panel formats   Derek Holzer
• [sdiy] panel formats   Matthias.Herrmann at jeppesen.com
• [sdiy] panel formats   Derek Holzer
• [sdiy] panel formats   Gergo Palatinszky
• [sdiy] Power supply ripple   James Dunn
• [sdiy] panel formats   Derek Holzer
• [sdiy] Power supply ripple   Louis van Dompselaar
• [sdiy] Power supply ripple   James Dunn
• [sdiy] panel formats   Matthias.Herrmann at jeppesen.com
• [sdiy] Power supply ripple   James Dunn
• [sdiy] panel formats   Gergo Palatinszky
• [sdiy] panel formats   Derek Holzer
• [sdiy] sync circuit woes   Dan Snazelle
• [sdiy] Power supply ripple   Ray Wilson
• [sdiy] panel formats   Andre Majorel
• [sdiy] sync circuit woes   Dan Snazelle
• [sdiy] sync circuit woes   Scott Gravenhorst
• [sdiy] Korg Polysix - now weirdness   Nate Reeves
• [sdiy] sync circuit woes   Tom Wiltshire
• [sdiy] sync circuit woes   David G. Dixon
• [sdiy] sync circuit woes   Dan Snazelle
• [sdiy] sync circuit woes   Dan Snazelle
• [sdiy] sync circuit woes   David G. Dixon
• [sdiy] Korg Polysix - now weirdness   Karl Ekdahl

Last message date: Thu Nov 20 19:19:58 CET 2008
Archived on: Tue Jun 3 23:33:25 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...