SV: Re: SV: Re: CV BBD (Was: [sdiy] repairing a BBD delay)

[René Schmitz]

Karl Ekdahl wrote:
> Rene, the circuit is drawn as using -15V and GND. The
> circuit i have only supply +15V and GND, the MN3XXX's
> are powered "upside down" as they require -15V and
> GND, should i just power the clock-circuit as you'd
> usually do it with +15V and GND - i mean, this would
> only turn the signals 180 degrees which shouldn't
> matter, right?

Yes, its only the polarity of the two clock phases relative to each 
other thats important.

Cheers,
  René

-- 
uzs159 at uni-bonn.de
http://www.uni-bonn.de/~uzs159