[sdiy] Frac Rack template

[Louis van Dompselaar]

http://www.blacet.com/FPtyp.jpg


> Specifically I am trying to build an entire 15" x 3u front panel.  Most of
> the measurements are pretty easy, but, I am being somewhat vexed by the
> .125" holes used to fix the front panel to the cheesy metal rails that run
> horizontally along the top and the bottom--I can't get a good sense of how
> far from the top and bottom and the L + R sides these "mount the panel to
> the rack" holes should go.