[sdiy] Ensoniq SQ2 repairs

[Dave Kendall]

You've probably done this already, but I had an EPS original model that came
back to life at least twice after going mad, by re-seating all the socketed
chips in their  (cheap looking) chip beds. It was a tip from an EPS service
guy, way back when they actually had a service department (!) in Putney,
London....

just my 2 pence worth ;-)

cheers,

Dave


on 24/9/06 19:04, Rainer Buchty at rainer at buchty.net wrote:

>> I have the idea that the RAM or ROM is a bit f*cked up and that stuff
>> like the midisettings are totaly wrong.
> 
> Basic advice for all Ensoniq synths behaving strangely:
> 
> Perform a factory reset.
> 
> If you can't trigger that procedure via the keypad anymore, then just
> remove the battery.
> 
> Rainer
>