[sdiy] Roland RE-201 motor lubrication?
Harry Bissell Jr
harrybissell at prodigy.net
Mon Mar 27 18:44:13 CEST 2006
Most sealed tape deck motors have
sleeve bearings made of some permanently
lubricated bronze material.
Usually the noise / grinding etc means
the bearings are worn out.
Lubricating them would be a really
temporary measure at best.
This is general info from an ex-tape deck
repair person, NOT specific to the Sapce Echo
H^) harry
--- Peter Ehrlich <grain at pacbell.net> wrote:
> Hi,
> Are there any recommendations as to how to lubricate
> the motor on
> a Space Echo?
> The motor noise has gotten slightly louder and has a
> lower grumbly
> tone to it. Works fine...
> The motor looks completely sealed...does the
> lubricant break down after
> so many years?
> Any info is greatly appreciated.
>
> Thanks,
> Peter
>
>
> __________________________
> Peter Ehrlich
> http://home.pacbell.net/grain
> http://homepage.mac.com/gretagrain
> gretagrain on AIM/iChatAV
> grain at pacbell.net
> gretagrain at mac.com
>
>
More information about the Synth-diy
mailing list