[sdiy] VCO bleed through to other modules

[harrybissell]

True about resistance.  In most cases the resistance is low
enough that there should BE no bleedthrough.  In some cases
(like aluminum panels, or painted, or anodized...) the resistance at the
jack might be VERY high (even if you wished for low)

H^) harry

Ian Fritz wrote:
> 
> At 08:22 PM 3/23/06, harrybissell wrote:
> >no... but it would work BETTER that way.  The shortest path back to the
> >source will be in the twisted pair... There will be a parallel path in
> >the panel
> >but from an inductance point of view, it will be much higher impedance
> >and most will prefer the shorter path
> 
> Interesting point.  I usually think in terms of resistance (dc ground loop
> effects).  The resistance through the panel could be less that through the
> wire, depending on the construction.
> 
>    Ian