[sdiy] VCO bleed through to other modules

[Ian Fritz]

At 08:22 PM 3/23/06, harrybissell wrote:
>no... but it would work BETTER that way.  The shortest path back to the
>source will be in the twisted pair... There will be a parallel path in
>the panel
>but from an inductance point of view, it will be much higher impedance
>and most will prefer the shorter path

Interesting point.  I usually think in terms of resistance (dc ground loop 
effects).  The resistance through the panel could be less that through the 
wire, depending on the construction.

   Ian