[sdiy] VCO bleed through to other modules

[harrybissell]

Only if thr return current is forced through the wire in the
pair...   The wire back to the source is probably the perferred
path (current will like to minimize the inductive loop... its the
shortest return path)

I sometimes go so far as to insulate the jacks from the panel. Now I'm
SURE what the return path is...

H^) harry

Paul Perry wrote:
> 
> A possible reason why this helps, is because (if the two wires are
> tied together) the radiated field from the current cancels out
> (opposite direction along the two wires).
> 
> paul perry melbourne australia
> 
> ----- Original Message -----
> From: "James Patchell"
> > I have my own way of doing this...I have found by running two wires to
> each
> > jack ( a signal wire and a ground wire), seems to keep things nice and
> > quiet.  I do this, despite the fact that on some of my panels, the return
> > signal of the jack is connected to the panel...it may seem silly to run
> all
> > those ground wires when electrically, they are not needed (but
> > electronically, they seem to be)....