[sdiy] VCO Drift

[Ken Stone]

or look up a xtal oven at the next ham swapmeet.

Ken

>If you are going to do this, you might as well 
>build a little oven for the ENTIRE circuitry.
>This isn't as crazy as it sounds.... and once you get up to 
>half a dozen voices, it would be a real saving.
>
>paul perry Melbourne Australia
>
>----- Original Message ----- 
>From: "Tim Ressel"
>Had a thought. I'm using the heater servo method on my
>VCOs to keep the expo convertor in line. That means
>the polyprop cap is probably the next biggest in terms
>of tempco. I wonder if the heater servo trick would
>work for it as well?
>
>
_______________________________________________________________________
Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>