[sdiy] stokastatron progress: what I've thrown together so far etc...

[René Schmitz]

Hi Anthony,

anthony wrote:
> Rene Schmitz tri-phase LFO - probably to be one of my favorite modules. 
> HEY RENE! Will ceramic 330pF and small mylar 220nF caps work well in 
> this? I tried it once with MPP caps, but they're kind of unwieldly on 
> the protoboard and I didn't like the layout I did so I rebuilt it. I 
> used an NP0 for the VCO part which should be no biggie. BUT I have some 
> polystyrene caps on deck if that would be necessary...

Well, I used 330p styrene. Not out of particular reasons, other than I 
had them. The 220n's were mylar. NP0 might be ok for the VCO, its not a 
particularly precise VCO anyway. I think in the phase shifting stages 
this should be fine too.

Cheers,
  René

-- 
uzs159 at uni-bonn.de
http://www.uni-bonn.de/~uzs159