[sdiy] Sequencer panel design is 99% complete. :) Interested in any constructive criticisms ......

[Rykhaard D.A.M.I.A.N.]

The pic is posted in my Design section, at my webpage, at:

http://deathlehem.bravehost.com/design.html

It's an almost completely final design.  I'm interested in any constructive
criticisms from anyone, before I 100% finalize the design and drill the
Maple panel for it. :)
A 3U height rack panel doesn't have enough room for duplication of Gate
outputs as well as 7 bit divider outputs, or extra multiples. :(  But I have
only 1 x 6U Maple panel, which I'd like to save for an 8 step sequencer
(same design as the 4 step) as well as drum sequencers. :O

That's why I'm curious to any input, anyone may have, for this one. :)

Thanks for any input. :)

--
Take care,
Warmth and Peace,
Ryk

http://deathlehem.bravehost.com/damian.html - D.A.M.I.A.N.;s webpage - Jan.
0406 update
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060111/293d004a/attachment.htm>