also... Re: [sdiy] SSM2044 Filter schematic??

[Pete Niedermayr]

Your what ? I've never heard of this bad. Is it a vintage modular from
Andora? If it is, is it good or is it ......... ? sorry for my engrish
----- Original Message ----- 
From: "Tim Parkhurst" <tparkhurst at siliconbandwidth.com>
To: <PRCamann at aol.com>; <synth-diy at dropmix.xs4all.nl>
Sent: Friday, May 21, 2004 1:55 PM
Subject: RE: also... Re: [sdiy] SSM2044 Filter schematic??


> Whoops! My bad!
>
>
> Tim (tail between his legs) Servo
>
> *******************************************
>
> > -----Original Message-----
> > From: PRCamann at aol.com [mailto:PRCamann at aol.com]
> > Sent: Friday, May 21, 2004 11:40 AM
> > To: synth-diy at dropmix.xs4all.nl
> > Subject: Re: also... Re: [sdiy] SSM2044 Filter schematic??
> >
> > In a message dated 5/21/2004 2:15:52 PM Eastern Daylight Time,
> > tparkhurst at siliconbandwidth.com writes:
> >
> > > You might also want to check out Craig Anderton's MIF (Mulitple
Identity
> > > Filter). The original is based on the CEM3320, but the article states
> that
> > > the tricks in the circuit can also be applied to the
> > > SSM2044.
> >
> > Careful -- the circuit can be applied to the (almost impossible to find)
> SSM2040,
> > NOT the 2044.  The 2044 is a dedicated LPF; the 2040 has four
gain/filter
> blocks
> > like the CEM3320.
> >
> > Paul Camann
> >
> > ---
> > Incoming mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
> >
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
>
>
>
>
>
***************************************************************************
> This message is confidential.  The information contained in
> this e-mail message is intended only for confidential use of the
> recipient(s) named above. If the reader of this message is not the
intended
> recipient or an agent responsible for delivering it to the intended
> recipient, you are hereby notified that you have received this document in
> error and that any review, dissemination, distribution, or copying of this
> message is strictly prohibited.  If you have received this communication
in
> error, please notify us immediately by e-mail, and delete the original
> message.
>
***************************************************************************
>
>
>
>