also... Re: [sdiy] SSM2044 Filter schematic??
Tim Parkhurst
tparkhurst at siliconbandwidth.com
Fri May 21 20:55:48 CEST 2004
Whoops! My bad!
Tim (tail between his legs) Servo
*******************************************
> -----Original Message-----
> From: PRCamann at aol.com [mailto:PRCamann at aol.com]
> Sent: Friday, May 21, 2004 11:40 AM
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: also... Re: [sdiy] SSM2044 Filter schematic??
>
> In a message dated 5/21/2004 2:15:52 PM Eastern Daylight Time,
> tparkhurst at siliconbandwidth.com writes:
>
> > You might also want to check out Craig Anderton's MIF (Mulitple Identity
> > Filter). The original is based on the CEM3320, but the article states
that
> > the tricks in the circuit can also be applied to the
> > SSM2044.
>
> Careful -- the circuit can be applied to the (almost impossible to find)
SSM2040,
> NOT the 2044. The 2044 is a dedicated LPF; the 2040 has four gain/filter
blocks
> like the CEM3320.
>
> Paul Camann
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
***************************************************************************
This message is confidential. The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************
More information about the Synth-diy
mailing list