[sdiy] what size drill bits for 1/4" and 1/8" jacks?

[Tim Parkhurst]

I'll try to look this up later and see if I have the information, but for
right now the quickest way to find out might be to check the web site for
the manufacturer of the jacks. Most manufacturers will have suggested
mounting hole drawings. Even if you don't know the exact manufacturer, you
should be able to get a rough idea from any manufacturer that makes a
similar jack. Just measure what you have and make sure it's reasonably
close. 

Tim (reasonably close) Servo


> -----Original Message-----
> From: bdu at fdiskc.com [mailto:bdu at fdiskc.com]
> Sent: Tuesday, May 11, 2004 5:37 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] what size drill bits for 1/4" and 1/8" jacks?
> 
> Maybe a stupid question, but what size drill bits (in lame US imperial
> units) do you guys use for 1/4" and 1/8"(mini) jacks?
> 
> Getting ready to make a patch/mult panel of mixed jacks as a cv/gate
> patchbay to easily route things around the studio... so I'm going to break
> down and get a drill and bits for this purpose and for other DIY work. Any
> tips/suggestions?
> 
> -Brandon
> 
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
> 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
 



***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************