[sdiy] Midi continious controller gennerators / controler surfaces?

[Oren Leavitt]

Hi Scott,

The PAiA MIDI to CV converter might be a step towards what you're after.
It has a switch-selectable mode where it will output 8 CVs.
Two units for 16 CVs?

http://www.paia.com/midi2cv.htm

Oren

Scott Juskiw wrote:

>> If you can be satisfied for non-DIY, the Evolution U-16 has 16 knobs, 
>> and
>> generates MIDI out.  Each knob can be assigned to any channel and any CC
>> assignment.  The assignments can be saved to memory locations (25 I 
>> think).
>>
>> Non-DIY price $69.95.  :)
>>
>> I have one I plan to do some hacking on. It looks like a fairly straight
>> forward modification to turn this into a CV to MIDI CC device. :)
>>
>
> OK, so who's got a circuit that goes "the other way"? I'm in need of a 
> circuit that will take MIDI out from a knob-box (like the Evolution 
> U-16) and generate CVs for controlling my synth. I don't need note 
> on/off or gates, just continuous controllers, maybe aftertouch too. 16 
> CV outputs, at least.
>

-- 
Oren Leavitt
oleavitt at ix.netcom.com