[sdiy] Truly white noise
synth at oldmail.charlielamm.com
synth at oldmail.charlielamm.com
Fri Jun 25 19:38:59 CEST 2004
Well, lots of folks have made noise generators out of transistors, diodes,
2N76477's, etc etc. I am trying to do things a different way, just to
see what I stumble upon.
On Fri, 25 Jun 2004, Scott Gravenhorst wrote:
> <synth at oldmail.charlielamm.com> wrote:
> >I was wondering if any DIYer has used a FM tuner or AM tuner as a noise
> >source. I believe there are fairly monolithic IC's to do this so it could
> >possibly be done with low parts count (or, you could plug your home stereo
> >into your synth, tuned between stations, but that might be a bit
> >inelegant?)
> >
> >And maybe include CV control to sweep through a range of frequencies.
>
> I'm curious why you would want to do this... ? At the very least, if you go out
> on gigs, you might have to retune the system. Why isn't a good LFSR or good
> diode noise source sufficient? Either one can be built from dirt cheap parts,
> the LFSR type is easily in the $2.00 or less range. And the noise spectrum can
> be limit and customized with filters to get the sound you want.
>
> >On Thu, 24 Jun 2004 Robotboy8 at aol.com wrote:
> >
> >> *Most people only need something that sounds like white noise. For instance,
> >> a detuned radio. No, it isn't white, but it sounds good enough to mix with a
> >> VCO before filtering.
> >>
> >
>
> ---------------------------------------------------------
> - Where merit is not rewarded, excellence fades.
> - Hydrogen is pointless without solar.
> - What good are laws that only lawyers understand?
> - The media's credibility should always be questioned.
> - The only good terrorist is a dead terrorist.
> - Governments do nothing well, save collect taxes.
>
> -- Scott Gravenhorst | LegoManiac / Lego Trains / RIS 1.5
> -- Linux Rex | RedWebMail by RedStarWare
> -- FatMan: home1.gte.net/res0658s/FatMan/
> -- NonFatMan: home1.gte.net/res0658s/electronics/
> -- Autodidactic Master of Arcane and Hidden Knowledge.
>
More information about the Synth-diy
mailing list