[sdiy] SN76477 pin ball machines!

[karl dalen]

I suggest that you hassle your local pinball machine
repair centre or those arcade machine deposits,
these people should have plenty of second hand
SN76477.

You could even be lucky that they
trow them  for free at you! 
 
Reg
KD


--- "Brice D. Hornback" <bdh at cyberbound.net> skrev: >
I just wanted to point out that those are the
> SN76477NF (Narrow) 28-pin DIP
> ICs with .070" pins and you'll need an adapter board
> to use them.  Blacet
> might have some of the adapter boards left if you do
> need them as those are
> the chips used on the final version... the Dark Star
> Chaos Rev. B.
> 
> However... here's the much more desirable and rarer
> SN76477N (Wide) 28-pin
> DIP ICs with .1" pins (and at a very reasonable
> price too):
> 
> $24.99 each or $99.99 for five!
> http://www.synthmodules.com/SN76477N.htm
> 
> You folks wanted to know where to get them for a
> reasonable price.... there
> you go.
> 
> ----- Original Message ----- 
> From: "Thomas Hudson" <thomas_hudson at mac.com>
> To: "Synth DIY" <synth-diy at dropmix.xs4all.nl>
> Sent: Monday, June 21, 2004 11:17 PM
> Subject: Re: [sdiy] sn76477
> 
> 
> >
> > There's a lot of five of them on eBay right now
> for $50:
> >
> > http://cgi.ebay.com/ws/eBayISAPI.dll?
> > ViewItem&category=38071&item=3731896564
> >
> > Tomy
> >
> 
>  

Höstrusk och grå moln - köp en resa till solen på Yahoo! Resor på adressen http://se.docs.yahoo.com/travel/index.html