[sdiy] Poteniometer nuts?

[Tim Parkhurst]

John S has just pointed out to me that there IS some metric hardware on the
Mouser Catalog page I pointed him to. On the upper right of the same page,
there is a selection of Eagle metric hardware, including M7 x 0.75 panel
nuts. Silly me, I looked right past it. 

Tim Servo


**********************************************************
> -----Original Message-----
> From: Tim Parkhurst [mailto:tparkhurst at siliconbandwidth.com]
> Sent: Wednesday, January 28, 2004 3:57 PM
> To: 'Speth, John'; Synth-DIY List (E-mail)
> Subject: RE: [sdiy] Poteniometer nuts?
> 
> You might also try searching for "Panel Nuts." Mouser has a selection of
US
> thread panel nuts for pots and switches, but no metric items. Still, the
> search term might turn up something you haven't seen before. In case
anyone
> is interested, the Mouser listing is at
> 
> http://www.mouser.com/catalog/617/1041.pdf
> 
> and shows a selection of US thread panel nuts by Keystone (go to the
bottom
> of the page).
> 
> 
> Happy hunting!
> 
> Tim (US nuts) Servo
> ***********************************************
> 
> > -----Original Message-----
> > From: Speth, John [mailto:John.Speth at coherentinc.com]
> > Sent: Wednesday, January 28, 2004 12:59 PM
> > To: Synth-DIY List (E-mail)
> > Subject: RE: [sdiy] Poteniometer nuts?
> >
> > > Just took a look at your picture.
> > > Looks like a standard model 16mm pot, made by multiple manufactures.
> > > Usually those have a M7 nut.
> >
> > After some good advice and digging, I've concluded that the nut is
> M7x0.75.  Search
> > the web for such a nut turns up zilch.  I understand these are pretty
hard
> to find
> > by themselves.
> >
> > Does anyone know where I can get some M7x0.75 nuts?
> >
> > John Speth
> 
> 
> 
>
***************************************************************************
> This message is confidential.  The information contained in
> this e-mail message is intended only for confidential use of the
> recipient(s) named above. If the reader of this message is not the
intended
> recipient or an agent responsible for delivering it to the intended
> recipient, you are hereby notified that you have received this document in
> error and that any review, dissemination, distribution, or copying of this
> message is strictly prohibited.  If you have received this communication
in
> error, please notify us immediately by e-mail, and delete the original
> message.
>
***************************************************************************




***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************