[sdiy] kog T3

[St Eric's...]

The 'Kog'problem is solved.

Thanks a lot all!!! especially Larry Hendry and Peter Blacket..

regards,
Eric.

-----Oorspronkelijk bericht-----
Van: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl]Namens St Eric's...
Verzonden: vrijdag 16 januari 2004 15:13
Aan: Synth Diy
Onderwerp: RE: [sdiy] kog T3


 Thanks Peter,

My powersupply is completely missing...and I have no clue what connector
needs which voltage..

I have contacted Korg in England, they have manual but they warned me that
there are no schematics for the powersupply in that manualand the best thing
was; they don't sell outside England.....and the pwrsupply is no longer
available..

So maybe a better question would be; anyone who knows what connector needs
which voltage?

reg
Eric van Baaren,
the Netherlands

-----Oorspronkelijk bericht-----
Van: Peter Blackett [mailto:dragon.servicing at virgin.net]
Verzonden: vrijdag 16 januari 2004 14:29
Aan: St Eric's...
Onderwerp: Re: [sdiy] kog T3


Dear Eric,
you wrote
> anyone around with the service manual for the Korg T3?

yes , by chance ......

> and I am looking for the complete powersupply for this keyboard.
>
the power supply is called I think  KLM-1376  ( 220/240 volt version ).
it includes the power supply for the el backlight as well as the other
supply voltages for the keyboard.
I'd contact your local Korg office and see if a replacent is available.
( you may well have done this already ).
regards Peter
South London England