[sdiy] CV to trigger...

[john mahoney]

----- Original Message ----- 
From: "Pat Kammerer" <spivkurl at wearerecords.com>
>
> To conver a CV (0 to +5) to a trigger signal, would it be sufficient to
run
> it through a schmidt trigger, or is it more complex than that?
>
> I would like to do this in a discrete manner, but if you have any
> suggestions, I would be happy to listen and learn!

I've been looking at the OB-X schematics a lot, lately, and I noticed that
only a +5V Gate signal is used in the synth -- no Trigger. Yet, the CEM3310
EG chip has both Gate and Trigger inputs. The Trigger input is connected to
the Gate through a 0.001 uF cap. This works with the 3310, but "Your Mileage
May Vary"!
--
john