[sdiy] Spartan 3 Eval board up and running....finally

[James Patchell]

Yes, come and join us <wheeze> <wheeze>
You cannot resist, you must join us <wheeze> <wheeze>
Let your anger flow and you will be one of us <wheeze> <cough>

And next, I will be getting Harry to use BBD's....

At 07:30 PM 4/6/2004 -0500, Paul Schreiber wrote:
>Ack! Jim's joined the 'Dark Side'!!!
>
>Paul S>
>
>----- Original Message -----
>From: "James Patchell" <patchell at cox.net>
>To: <synth-diy at dropmix.xs4all.nl>
>Sent: Tuesday, April 06, 2004 7:24 PM
>Subject: [sdiy] Spartan 3 Eval board up and running....finally
>
>
> >          I finally got the Memec Spartan 3 board up and running.  Turns 
> out
> > the problem was the JTAG pod that came with the kit.  The Spartan 3 is a
> > 2.5 volt part (well, the IO pins are), and the pod that came with the kit
> > won't work at that voltage.  The Pod was more or less free, so I didn't
> > feel too ripped off, but I did end up having to purchase a Xilinx Parallel
> > Cable IV, which now works 100% reliable.
> >
> >          Now, the next thing I need to do is interface the eval board to a
> > STK500 AVR board (with a Mega128)...and an audio dac....
> >
> >
> >          -Jim
> > ***************************************************************
> > http://www.oldcrows.net/~patchell
> >
> > ***************************************************************
> >
> >

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************