[sdiy] Power Supply

[Cornutt, David K]

From: Robert Holmström [mailto:robertholmstrom at hotmail.com]
> 3. Why are the outputs soldered together in groups |-out, -s 
> | -s rtn, com, 
> +s rtn | +s, +out|. They are not soldered together on my MOTM 
> power one 
> supply...

The "sense" terminals are for use in situations where
significant voltage drop is expected, such as when the
power supply must be mounted a long ways away.  They
basically provide a way to tap into the supply's regulation
loop to add a remote sensor, so that the voltage is
correct at the point of consumption.  For a typical
synth application, you don't need to worry about it.
Leave the links in place and just use the output
terminals.