[sdiy] Milton Update

[Peter Grenader]

kids,

The Milton design project is advancing nicely.  I have uploaded a picture of
the completed bank board design for your viewing pleasure. Go here:

http://www.buzzclick-music.com/not_yet.html

No, the traces will not be multicolored in the final product, but a pack of
felt pens can be included so you may color them yourself!

Please note that these boards have all sorts of assembly options and one
board is required for each bank one wishes to have. On some, only the pots,
their direct associated components and the first op amp with its required
components will be installed.  On another, the hardware for the LEDS and
pulse outs will also have to be stuffed, and on still others, the AND gates
and their associated parts (including the second 074) will need to be
installed as well. 

There should be no configuration however where ALL parts are installed on a
single board.  For those of you thinking of getting one of these, the stage
pots spacing is at .75 inch centers and is currently configured to accept
Panasonic board mounted pots with threaded rings , much like the type John
Blacet uses.  If these are not your pot preference, any small bodied types
with inline leads spaced at .1 centers (like Alpha) will do.

For general info regarding what the hell a Milton is, go here:

http://www.buzzclick-music.com/about_milton.html

best,

Peter