[sdiy] pcb-fab help

[Luís Marka]

Now that the subject was raised, I would like to know from you folks what
software are you using to generate your PCBs layouts. I am using Eagle
Light, and it's OK for small boards (the Light vesion is limited to some 4"
by 3.2"). What are you folks using??



> hi!
>
> i have been working on some DIY processing stuff, and would like
> to get my own PCBs made. i need a quantity of around 30-50, because i plan
> to modify them by using different parts/etc, and will be building several
> of the same circuits up for some musician friends of mine.
>
> however, i have no experience in laying out a PC board, which is
> why i am writing the list. i would be glad to pre-pay anyone with some PCB
> layout experience to create a board from my schematic, and to draw up
> adequate files so i can have a fabrication place make the boards for me.
> (or even to get the boards done and have them sent here.) they will be
> relatively small (2"x3" max, i'm guessing), single-sided, and relatively
> simple.
>
> some experience with designing PC boards is preferable. if you are
> reading this far, i will be glad to pay you a very decent price for a few
> hours' layout work... this is not something i would ask people to do for
> free! :)
>
> please do contact me if you have any tips, even if you are not
> interested in doing layout, because i would love to know how much i should
> expect the fabrication to cost, and what is a fair price to pay for
> something like this!
>
>
> thanks again!
> andy