[sdiy] Aftertouch via Pressure

[Tom Arnold]

On Tue, Jul 08, 2003 at 07:37:19PM -0600, Ian Fritz wrote:
> For my wind controller I used a 0-1 psi Si pressure gauge from 
> SenSym/ICT/Honeywell, part # SDX01G4, available from Digikey.  They make 
> even lower pressure units, but Digi doesn't have them.  Here's where to 
> look for other options.
> 
> http://content.honeywell.com/sensing/hss/pressure/
> 
> I don't know how much pressure you are going to be able to generate with 
> your method.

Perfect!  This is much smaller then what I've been looking at today.

Yes, I'm wondering how much pressure i'll be able to apply to the tubing also,
only way to find out is to try I suppose. 

Looks like these units run about $30.  Never thought to look in Digikey.

Thanks for the pointer and I'll definatly let everyone know what I find.

-- 
 ------------------------------------------------------------------------
 - Tom Arnold -       When I was small, I was in love,                  - 
 - Sysabend   -       In love with everything.                          -
 - CareTaker  -       And now there's only you...                       - 
 --------------         -- Thomas Dolby, "Cloudburst At Shingle Street" -