[sdiy] trace repair HELP

[MRATX at aol.com]

I've had good luck in some cases with using wire-wrap wire, and soldering it 
to the components that the traces join. Often the area where the component is 
soldered in is larger and easier to solder to than what you'd get by exposing 
the damaged trace, especially if you're dealing with very fine traces.  

Mark 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20030206/e3cbaf09/attachment.htm>