[sdiy] stumped

[Paul Perry]

At 02:12 PM 2/04/03 -0500, Michael Ruberto wrote:
> what I would like to do is have a 
>voltage controllable scaling on the input and output. let's say I run a 
>0-10V signal in, I want to use a CV to scale it to the 0-4V range but then 
>scale the output back up to 0-10V. the output will always be the same range 
>as the input signal regardless of the scale factor set by the Scale CV. 

I have never tried to make a divider circuit, but I think the AD633
data sheets show how. Fortunately you won't be asking it to divide by zero ;D

I think you can do this with a pair of AD633, one for multiply, one for divide.
Unless you have MUCH more time than money, I don't think a 3080 would be the 
best.

paul perry Melbourne Australia