[sdiy] JP6 help

[Tony Allgood]

Hi all,

I'm completely stuck with what seems a small problem on a Jupiter 6. The
white bender button on the main panel, has a LED that is continually
lit. The function is always on, so pressing the switch has no effect
both on either the LED or actually switching the bender panel off.

OK, so it looks as its a bad switch. But no, the switch is OK. As is the
LED and the associated diode. [sometimes these diodes go leaky and stop
the matrix decoders from realising the switch has been pressed]. Presing
the switch does affect that particular matrix line, but the depress is
not being detected by the CPU board.

All other switches are operating fine. Has anyone seen this problem with
any of the soft switches on the JP6 before? Any help would be
appreciated.

Cheers,

Tony

www.oakleysound.com