[sdiy] spring reverb.......

[Tim Ressel]

Yo,

Right off hand I'd say you have too much gain on the
first stage. Try taking out the 4.7K resistor off of
the first opamp. Just list one leg, and leave the 100K
in place. This will reduce the gain from 20 down to 1.
 

Let me know what happens.

--TimR

--- daryl groetsch <synth_dg at yahoo.com> wrote:
> Hello,
> I've built the spring reverb schematics i have found
> on the web (such as the one's at Accutronics site)
> but
> with little luck. In these cases i usually start
> from
> scratch using the schematics as guides. Anyway, I've
> gotten to the point where I have close to enough
> gain
> but now have a nasty distortion. One problem might
> me
> that i don't know the values of my tanks. Any tips
> would be very appreciated. I'm a beginner and not
> sure
> where to go from here. Excuse the crude artwork ; )
> here's the link to my current circuit:
> 
> http://www.angelfire.com/droid/a/reverb.jpg
> 
> thanks a lot, 
> Daryl
> 
> =====
> There are 10 kinds of people in the world: 
> Those who understand binary, and those who don't
> 
> http://www.darylgroetsch.com
> 
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
> http://launch.yahoo.com/u2


__________________________________________________
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2