[sdiy] Synthi A breakout cable

[mdimmm at hotmail.com]

Hello everyone,

I'm looking for some technical advice for a simple DIY conversion.
I would like to make a breakout cable to connect my Synthi A to my Doepfer
A-100 system, and I'm not sure whether to use resistors in the cables or
not. Synthi modules connect to each other via 2.7kOhm resistors, and Doepfer
modules don't, they're simple patch cables. The breakout cable would connect
to the 32-way Prestopatch socket on the Synthi, with the possibility of 16
inputs and 16 outputs going into the Doepfer system.
To keep the signals on suitable level for both machines, should I put
resistors in the inputs, outputs, all 32 cables or use none at all?

Thanks!

MDimm