[sdiy] Synthi A breakout cable

[m d]

Hello everyone,

I'm looking for some technical advice for a simple DIY conversion.
I would like to make a breakout cable to connect my Synthi A to my Doepfer 
A-100 system, and I'm not sure whether to use resistors in the cables or 
not. Synthi modules connect to each other via 2.7kOhm resistors, and Doepfer 
modules don't, they're simple patch cables. The breakout cable would connect 
to the 32-way Prestopatch socket on the Synthi, with the possibility of 16 
inputs and 16 outputs going into the Doepfer system.
To keep the signals on suitable level for both machines, should I put 
resistors in the inputs, outputs, all 32 cables or use none at all?

Thanks!

MDimm

_________________________________________________________________
Get a speedy connection with MSN Broadband.  Join now! 
http://resourcecenter.msn.com/access/plans/freeactivation.asp